TS CCD Adapter for Canon EOS Lens to M48 with 10mm Optical Length

TS-Optics short M48 Adapter for CCD cameras and CMOS cameras to Canon EOS lenses

Use your high-quality EOS camera lenses and, for example, take photographs of large areas of the sky. In this case, the CCD camera replaces the dSLR.
The adapter is suitable for astro photography cameras up to 32 mm working distance. All common ZWO, Atik, SBIG, QHY or Moravian cameras will fit. An adaptation to T2 is also possible: TSM48-T2.
 

The most important connection adapters to the EOS lens adapter:

• Reduction to T2 via TSM48-T2, TSM48-T2L and TSM48i-T2a (differnt lengths)
• Extension to M54 via TSM54a-M48i (optical path 1.5 mm)
• Extension to M68 via M68-M48i (no optical path)
• Filter changer for unmounted filters TSFEK50 (optical path 12 mm - with 2x M48Abstimmring1). With this, you can even create L-RGB images or use nebula filters between camera and lens.

Above picture: Atik camera with Canon lens (camera and lens not included)

You have a high-resolution CCD camera and a sharp Canon lens? With this adapter, you can connect both to each other for wide field imaging via the M48 system.

Correct distances:

Canon lenses have a back focus of 44mm. The shortest adapter length is 14.5 mm. So you have 29.5mm of back focus you can use e.g. for a filter wheel or short off-axis-guider. If such accessories are not needed, the distance can be bridged by optional M48 extensions or spacers.