Home :: MOUNTS, TRIPODS & GOTO :: Tripod Heads, Mounts & Adapters :: Tecnosky eLLe Duo Mount for Binoculars and Small Telescopes with Encoder Mounts (but without Encoders)

Tecnosky eLLe Duo Mount for Binoculars and Small Telescopes with Encoder Mounts (but without Encoders)

Manufacturers View products from this brand

out Ask about stock
2.50 kg
Our price:
including VAT 20.00 % ( £74.83 )

The Tecnosky eLLe Duo Alt-Az mount is an elegant and stable full fork mount that can be used on all tripods having a standard 3/8" screw. It can easily handle heavier loads and binocular apertures up to approx 120mm as well as small telescopes. The design of the mount alows for unobstructed viewing from the horizon up to the zenith. Each axis is adjustable for friction. The mount also provides mounting points for an optional finder bracket with finder shoe that can accept conventional 50/60mm finders. Its main mounting plate has a slotted section and is supplied with a 1/4" thumb screw. This provides quick and easy mounting of smaller binoculars with adjustment for balance. The slot is also wide enough to accept M6 screws for the mounting of a dovetail clamp if preferred.

For convenience the mount features holes to accommodate up to 6 x 1.25" eyepieces. A further enhancement is the inclusion of encoder mounting points to allow the mount to be used as a highly accurate push to system. To do this you will need to add our encoder kit and either the Nexus II or Nexus DSC encoder interface.


  • Alt/Azimuthal full fork mount
  • Weight: 3.3 kgs
  • Payload capacity: at least 10 kgs
  • Tripod connection: 3/8" photo tripod thread (reducer to 1/4" optional)
  • Panning area: 360° / Tilting area: >90°
  • Accessory interface: slotted holes for ¼", 3/8" and M6 screws
  • Adjustable friction in Alt and Az
  • Distance between fork arms: 300mm (this is the usable max distance, i.e. the width of the binoculars must be less than this somewhere in the middle. This is a bit tricky, because of the shape of binoculars, but we'd suggest to measure the width about 4-5cm forward from the center of gravity of the binos to get a good approximation of compatibility. We suggest 4-5cm as the overall depth of the base is 8cm, i.e. the wides part of the binos will be about half of this distance forward.)

: *
: *
: *
Baader CCD RGB Filter-Set 1.25" for Beginners
Parfocal Rings for 1.25-inch Eyepieces - Set of 4
Solar Filter for 114mm Newtonian Telescopes
ZWO M42-M48 Adapter 16.5mm Extender Ring
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.