ASA Adaptor to M48 - 2" Filterthread for 3" WYNNE Corrector and 3" Reducer of ASA and
TS Gigant Off Axis Guider
... Adaptor to M48x0,75 male / 2" Filterthread - very short - only 4mm lengh
The M48 Adapter will be fixed direktly upon the ASA 3" Correctors or TSG-OAG Off-Axis-Guider th..
Base for Crayford Focusers for Newtonian Telescopes of Tube Diameter between 200mm and 260mm
With this base you can attach several focuser models currently available on your Newtonian telescope. You can attach the base to the telescope using four M4 or similar screws (not included). We offer th..
Base for Crayford Focusers for Newtonian Telescopes of Tube Diameter from 260mmWith this base you can attach several focuser models currently available on your Newtonian telescope. You can attach the base to the telescope using four M4 or similar screws (not included). We offer this base for differe..
TS Expanse / Baader Hyperion T-Adapter M43 to T-2 (M42x0.75)-to adapt standard DSLR T-Rings
This adapter ring adapts Baader Hyperion eyepieces to accept cameras via standard T-Rings.The TS Expanse and Baader Hyperion eyepieces have an okular lens surrounded by an M43 thread.The Hyp-T2 adapter..
TSFI2-1 Adapter for 1.25 inch filters to 2 inch filter thread Filter Adapter with M28.5 female and M48 male thread Converts your 2" filter thread to a 1.25" filter thread to accept 1.25" filters when necessary.
Can be used with other optical accessories as well. (e.g. to insert/screw in a 1...
Adaptor with T2 female thread and M28 female thread (1.25" filter thread)
... low profile special adaptation for adaptation of eyepieces with male filter thread to T2Once you remove their 1.25" barrel many eyepieces have a male 1.25" filter thread (M28). For those eyepieces this adaptor provides..
This is a variable M48 adapter/extension with a M48 male thread at one end and M48 female thread at the other end.
It is built from a 5mm and 8.5mm extensions, plus a 2mm wide securing ring with M48 male thread; the 5mm part has got a long male thread (10mm), but other than that the parts could be a..
This ULTRA SHORT M48 camera adapter ring with 1mm optical length is a connecting ring that links the Canon EOS digital camera with other optical devices coming with a 2" filter thread (M48). Please note, you cannot screw it directly into the back of an SC telescope as that thread is actually larger ..
Maksutov Cassegrain with integrated field flattener
- Aperture 100mm / Focal length 1000mm - f/10
- versatile Maksutov Tele Objective with long focal lengthThis powerful Maksutov Tele Objective - is a good alternative to expensive original tele objectives for an interesting price. You can attach (..
2" Parfocalising Ring for 2" Eyepieces / CCD Locking RingThis adapter fits directly onto 2" barrels of eyepieces and adapters. It can be locked in place with three slug screws.This adapter is usually used to create a firm stop at a position of your choice, for example if you wish to parfocali..
Starway Adapter Rail for Optical Telescope Tubes with Vixen or Skywatcher EQ-type Dovetails and Telescope Mounts with 3" (Celestron CGE or Losmandy) Dovetail ClampsHere is a solution if you want to mount a telescope with a Vixen GP-style (or Skywatcher EQ-style or Celestron Advanced GT-style/CG-5-..
Adapter for Skywatcher Maksutov telescopes to convert your Maksutov's visual back to a SC threaded back.
Please note, currently there are (at least) two different thread sizes on various Maksutov telescopes. This adapter fits only those Skywatcher and Orion Maksutov telescopes that came with a male ..
Adapter for Skywatcher Maksutov-Cassegrain and Orion US Maksutov-Cassegrain Telescopes to SC-Thread
This adapter allows the usage of the wide SC accessory range with your Skywatcher / Orion US Maksutov-Cassegrain TelescopesPLEASE NOTE, THIS IS NOT A T-ADAPTER!With this adapter you have the same ..
This is a set of two Starway Guidescope clampshells for guidescopes with tube diameter between 30mm to 80mmThe TS clampshells are solidly made from metal and are intended for smaller scopes.The screws have a plastic tip to prevent the guiding scope from scratches.Suggested use:You can use y..
Starway Dual Mounting Platform - SHORT VERSION
A compact side-by-side mounting plate, compatible with Vixen / EQ / CG-style dovetailsSimilar in function to our larger Dual mount, this variant is used when there is little space on the mount.The TS Dual Mounting Plate S allows you to mount two ..
T-Adapter from M35 to T2 with 1mm Optical Path - Low Profile for NexStar 4 and for all C90 Spotting Scopes as well as Meade ETX telescopes with M35 thread.The compact Meade ETX and Celestron Maksutovs have a 35mm thread at the rear. This adapter provides an adaptation from that thread to the stand..
T2 Adapter Ring for Sony Alpha Nex and E-mount camerasThis adapter allows you to connect your Sony Nex camera to a telescope or spotting scope.The ring fits into the bayonet of the camera and has the T2 (T-Mount, M42x0.75) thread on the inside. You only need a T2 male thread on the telescope or ..
This T-Ring, T-mount or T-2 ( T2 ) adapter ( adjustment ) ring is a connecting ring that links the Olympus digital camera or other Four Third cameras with other optical devices (usually telescope accessories) coming with T-2 thread...
T2 Ring for the Micro Four Thirds System
With this adapter ring, you can attach your micro four thirds camera to the T2 system.
As micro 4/3 cameras have a back focus of only 20mm, therefore this adapter usually consists of two parts, but some telescopes have short back focus and might not ne..
T2 Ring for the Micro Four Thirds System WITHOUT EXTENSION TUBE
THIS ITEM IS SUITABLE FOR TELESCOPES ONLY WITH SHORT BACK FOCUS!!!With this adapter ring, you can attach your micro four thirds camera to the T2 system.
As micro 4/3 cameras have a back focus of only 20mm, therefore this adapter usual..
T-ring - T2 adaptor ring for Canon EOS bayonet - only about 1mm optical length!This adaptor screws directly into the Canon EOS body and enables you to connect objectives with T2 (M42x0.75) thread.The EOS bayonet is much wider than T2 so the adapter can be mounted completely into the camera body...
T2 adaptation for the TS 7-21mm Zoom Eyepiece - for SLR cameras and for digiscoping.This T2 adaptor is screwed directly onto the thread that is located under the rubber eyeguard of the TS Zoom eyepiece. It offers a firm and secure grip even for heavy cameras.
With this adapter you turn your TS ..
TS Optics T2 tilting mechanism - for perfect field definition
It allows perfect alignment between camera and a slightly tilted focal planeTS T2 Tilting UnitMany astro photographers know the problem: one focuses as precisely as possible but in one or two corners, the stars are not pinpoints. O..
TS Optics Eyepiece, Accessory and Filter Set in Aluminium Case
- a kit of important and useful accessories for almost any telescope!
- the large package is available for a top notch price!The TS Optics Eyepiece and Accessory Set contains the most important accessories that will fit almost ev..
Triton table top tripod - with up to 3 kg load capacity... a very good tripod for travelling with only 28cm transport length - big versatility and equipment - small dimensions and priceThe TRITON travel tripod FT 05 offers not only elegant design but also all comfortable features of a bigger tr..
2" Extension Tube - 35mm LengthThe 35mm 2" extension tube is the shortest of the available extension tubes in 2". Most adapters or eyepieces just fit into it snugly. In some cases the barrel of the eyepiece or adaptor may even be a little bit too long so that it extends a little bit beyond the ext..
The TS 2" Eyepiece Holder can be screwed onto any T2 male thread and provides a clamp for 2" eyepieces and other accessories.Then the accessory is firmly held in place through a brass compression ring.Examples of use:
-- Visual back for Telephoto lenses with T2 thread
-- 2" clamp that can be sc..
TS 2" PHOTOLINE 0.8x reducer / flattener for for 70mm / 80mm ED Refractor Telescopes2" Field flattener with T2 connection on the camera side - reduction of the focal length: 0.8x for smaller EDsThis 0.8x corrector is designed especially for smaller two-element ED refractors.
It is suitable for..
TS 2" Star Diagonal Mirror - 91% Reflectivity - with 2" to 1.25" AdapterThis is a very affordable star diagonal with exceptional optical and mechanical quality for its price you pay. Even when compared with many much more expensive star diagonals, we couldn't see a difference in image quality.Th..