Primaluce Lab PLUS Curved Blocks Radius Blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" Telescopes
The PLUS curved blocks ( 1 set = 2 pieces) can be easily installed on Celestron C8, C9.25, C11, Edge HD 800, Edge HD 925, Edge HD 1100 or Meade SC and ACF 8" telescopes.
Simply remove the screws already on the telescope and fix the curved blocks (one at the top end and another one at the rear end of the telescope tube) and secure them with the same screws (but make sure that they are long enough, in case if the manufacturer supplied the telescope with wrong screws).
On the curved blocks you can then connect the 350mm or 495mm PLUS Losmandy dovetail bar using 2 pieces of M6 screws for each curved block (included in the box).
You will have to buy the dovetail bar separately as it is not included with these radius blocks...you'll also have to make sure that you choose the right length for your telescope depending on the size of your telescope. If not sure, please get in contact.
|Weight in Kg||0.45|