Primaluce Lab Losmandy PLUS Dovetail Bar with Curved Radius Blocks for C9.25, C11, EdgeHD 925 and 1100 Telescopes
Primaluce Lab 495mm Losmandy PLUS Dovetail Bar with Curved Radius Blocks for C9.25, C11, EdgeHD 925 and 1100 Telescopes
This set, composed of the Primaluce Lab 495mm PLUS Losmandy dovetail bar and two PLUS curved blocks (radius blocks), can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) or above (for supporting a parallel telescope or guidescope) of a C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.
The curved blocks can be easily installed on C9.25, C11, EdgeHD 925 and EdgeHD 1100 telescopes. Simply remove the screws already on the telescope and fix the curved blocks (one in front, one in rear of the optical tube) and secure with the same screws. On the curved blocks you can then connect the 495mm PLUS Losmandy dovetail bar using 2 M6 screws for each curved block (included in the box).
EdgeHD 925 telescope with the Losmandy PLUS dovetail bar with curved blocks installed both above and below the telescope.
NOW WATCH ON YOUTUBE! (in Italian, but with English subtitles...)