Photonic First Contact Cleaning Solution DELUXE Kit - Legacy Product
COLOURLESS First Contact Cleaning Solution - Deluxe Kit - LEGACY PRODUCT from Photonic Cleaning Technologies
NON-EUROPEAN CUSTOMERS, PLEASE READ THE SHIPPING INFORMATION. CLICK HERE.
ATTENTION! **This is a legacy formula. Unless there is a specific reason you need this product vs the Red First Contact Formula (which dries faster, has lower adhesion on gold, and is easier to see), we highly recommend purchasing Red First Contact Formulas. If you have any questions, please contact us.**
For mounted mirrors, refractor objectives, and corrector plates we suggest purchasing our chemical resistant nylon mesh (FCNet) for easier film removal. Eyepieces and objectives demand FCNet or FCUF unwaxed dental floss.
Colorless Regular Kit Includes:
- 1 x 15ml Applicator Bottle
- 4 x 29ml Refill Bottles
- 50 Peel Tabs
- Sample of FCNet (chemical resistant nylon mesh) and FCUF (Floss)
UN1170 - ETHYL ALCOHOL SOLUTION! SHIPPING IS TO UK AND EUROPEAN UNION ONLY VIA ROAD SERVICE!
(Exceptions apply. We cannot ship to European destinations where there is only ferry or air service available.)
(If you are from outside the European union, please find your local dealer and buy the air duster from them. We can supply some Photonic Cleaning accessories worldwide, but not the flammable products. )
We cannot send it with a cheaper postal mail service due to postal restrictions, therefore SHIPPING IS POSSIBLE ONLY VIA INTERLINK EXPRESS, HENCE THE HIGHER SHIPPING COST.
Max 1 litre in one parcel!
(Basically, you may order more than 1L, but those will be packed in separate boxes, so you'll receive two or more boxes...this will make no difference to the shipping cost when delivered in the UK, but it'll make shipping more expensive when delivered to Europe. We'll contact you if there is a surcharge.)
The below information is only an extract from the SDS Safety Data Sheet.
You can download the complete SAFETY DATA SHEET here: Click here!
Shipping: ADR: UN1170
UN proper shipping name: ETHYL ALCOHOL SOLUTION
Transport hazard class(es): 3
Packing group: II
Environmental hazards: no
Other ecotoxicological advice: Do not discharge product into the environment without control.
Special precautions for user: Tunnel code: D/E
Handling and Storage
Precautions for safe handling
Ensure thorough ventilation of stores and work areas. Observe Label precautions.
Personal precautions, protective equipment and emergency procedures
Breathing protection required. Avoid contact with the skin, eyes and clothing.
Protection against fire and explosion:
Vapors may form explosive mixture with air. Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.
Conditions for safe storage, including any incompatibilities
Suitable materials for containers: carbon steel (iron), Stainless steel 1.4401, Stainless steel 1.4301 (V2), aluminum, tin (tinplate), glass, zinc coated, polyethylene, polypropylene, nylon. Protect from light.
Further information on storage conditions: Keep container tightly closed and in a cool place.
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. Avoid contact with the skin, eyes and clothing. Do not inhale gases/vapors/aerosols. Take off immediately all contaminated clothing. Store work clothing separately.
Conditions to avoid
Assessment of irritating effects:
May cause slight irritation to the skin. Eye contact causes irritation.
The product is stable if stored and handled as prescribed/indicated.
Vapours may form explosive mixture with air.
Corrosion to metals: Corrosive effects to metal are not anticipated.
Formation of flammable gases: Forms no flammable gases in the presence of water.
Possibility of hazardous reactions
Reacts with acids. Evolution of explosive gases/vapors. Reacts with strong oxidizing agents.
Melting temperature: unknown. above -95 °C
Boiling temperature: unknown.below 75.6 °C
Flash point: unknown. below -6 °C
Flammability: Highly flammable.
Lower explosion limit: approximately 2% (V) 70 g/m3
For liquids not relevant for classification and labelling., The lower explosion point may be 5 - 15 °C below the flash point.
Thermal decomposition: appr. 300 °C
Self ignition: Based on its structural properties the product is not classified as self- igniting.