M10 Tripod Screw for Vixen, Skywatcher, Fornax, Astrotrac etc Tripods
M10 Tripod Screw for various Vixen, Skywatcher, Fornax, Astrotrac etc tripods
If you are not sure about compatibility, please contact us.
This screw was originally supplied with our Fornax tripod, but we ended up with some surplus as when we convert the Fornax tripod into an Astrotrac tripod, we would replace this screw with a 3/8" UNC photo thread bolt...
In case you have an Astrotrac tripod, but wanted to use with an M10 thread as well, i.e. you have a mounting head that accepts M10, you would need this screw/bolt.
Threaded length: overall 53mm (including a gap). (Basically, 11mm thread at the very end, then gap, then 16mm thread again, just before the plastic head)
Comes with one large washer.
|Weight in Kg||0.1|