Large 16cm Mounting Platform / Clamp for Losmandy-style Dovetail Bars - Black
High quality Losmandy-compatible dovetail accessory adapter / clamp for Losmandy plates / bars / rails - with brass locking mechanism
This large clamp will fit Losmandy compatible plates. It is also compatible with "D" sized Farpoint, Celestron CGEM or CGE dovetail bars, used on Celestron CGEM, CGE Pro and Skywatcher EQ6, AZ-EQ6, EQ8 etc. mounts. It is also compatible with other similarly sized dovetail bars from other manufacturers.
It won't leave marks on your plate as the screws are not getting in direct contact with the plate due to the brass locking mechanism.
Recommended for heavy duty use for loads up to appr 20-30kg, depending on the position and number of fixing screws.
When used at its max load capacity, we'd recommend to use all 4 larger holes (8mm diameter) plus two more (6.25mm holes) at the far ends secured with screws.
Width: apr. 139mm (with thumbscrews)
Distance betveen the four symmetrical holes is 35mm (center to center). Size of these holes: min 18mm at the wider top area and 8mm at the bottom.
Distance betveen the two smaller holes that are furthest away from each other: 60mm (center to center). Size of these holes: min 18mm at the wider top area and 6.25mm at the bottom.
Plus there are two alongated holes (most likely suitable for M6 screws). Width of hole at the top is 12mm and at the bottom: 6.25mm.
Size of the central hole: 1/4" photo thread
See picture showing distances and sizes.
|Weight in Kg||0.5|