- per page
In stock (5) SKU: 365640-AZ5
365ASTRONOMY
365Astronomy AZ5 Versatile Vari-angle Micro-Motion Alt-Azimuth Telescope Mount with Stainless Steel Tripod
The AZ5 mount provides heavy-duty Alt-Azimuth telescope carrying capabilities up to about 8kg payload. There is no need for a counterweight as a the optical system placed above the centre of the tripod. Fine movement is...
In stock (2) SKU: 20311
SKYWATCHER
Skywatcher AZ5 Deluxe Alt-Azimuth Telescope Mount & Tripod
Ideal No Fuss, Grab-and-Go Telescope Mount for Easy Visual Astronomy as well as Daytime Terrestrial Observations!
The elegant and well engineered Sky-Watcher AZ5 is a lightweight, highly portable Alt-Azimuth...
In stock (2) SKU: 20312
SKYWATCHER
Skywatcher AZ5 Deluxe Alt-Azimuth Telescope Mount Head
Ideal No Fuss, Grab-and-Go Telescope Mount for Easy Visual Astronomy as well as Daytime Terrestrial Observations!
The elegant and well engineered Sky-Watcher AZ5 is a lightweight, highly portable Alt-Azimuth...
In stock (3) SKU: VSH36507-0.5KG-WEIGHT
365ASTRONOMY
0.5kg EXTRA Counterweight for 365Astronomy PHOTO UNO or PHOTO DUO Counterbalance Systems
If you already own a 365Astronomy PHOTO UNO or PHOTO DUO Counterbalance Upgrade Kit and straggling with balance, you might need to add few more counterweights.
In stock (2) SKU: 365640-TRIPOD-ONLY
365ASTRONOMY
365Astronomy AZ5 - TRIPOD ONLY - Compatible with EQ3, EQ5 and Skytee Mounts
This tripod originally came as part of our AZ5 Mount & Tripod kit, but as you sell the head separately, the tripod also became available on its on.
It is a cheap and lightweight replacement for an EQ3 or EQ5 tripod....
In stock (5) SKU: 365640-AZ5-WITHOUT-TRIPOD
365ASTRONOMY
365Astronomy AZ5 Versatile Vari-angle Micro-Motion Alt-Azimuth Telescope Mount - HEAD ONLY
The AZ5 mount provides heavy-duty Alt-Azimuth telescope carrying capabilities up to about 8kg payload. There is no need for a counterweight as a the optical system placed above the centre of the tripod. Fine movement is...
Ask about stock
SKU: VSRF36506
365ASTRONOMY
365Astronomy Flexible 3D Semi-Spherical Lightweight Guiding Mount - Finder Base
If you want to use a 50mm finderscope as a guidescope, you would also need a platform that enables you to point the finderscope at a bright guide star.
This lightweight base can be used for small finderscopes as a...
Ask about stock
SKU: 365641-SZ-HEAD
365ASTRONOMY
365Astronomy Giant Alt-Azimuth Binocular Mount Head ONLY
This mount provides heavy-duty Alt-Azimuth binocular or telescope carrying capabilities up to about 6kg payload. This mount has been designed to carry large observation binoculars, but it might also be used for small...
In stock (5) SKU: 365666H-GIAZ-HEAD
365ASTRONOMY
365Astronomy Giant Alt-Azimuth Telescope Mount Head ONLY
This mount provides heavy-duty Alt-Azimuth telescope carrying capabilities up to about 12kg payload. The advantage of this design is that there is no need for a counterweight as a second optical system can be used as a...
In stock (3) SKU: 365666-GIAZ
365ASTRONOMY
365Astronomy Giant Alt-Azimuth Telescope Mount with Stainless Steel Tripod
This mount provides heavy-duty Alt-Azimuth telescope carrying capabilities up to about 12kg payload. The advantage of this design is that there is no need for a counterweight as a second optical system can be used as a...
In stock (10) SKU: 365BALLHEAD-MEDIUM
365ASTRONOMY
365Astronomy Heavy Duty High Quality Photographic Ball Head with Quick Release Plate
This heavy duty, professional quality ball head will serve you as a general ball head for any dSLR camera up to 10kg payload, and as such, we also warmly recommend it to be used with our new Fornax 10 LighTrack Mark II mobile...
Low stock (1) SKU: VSH36507-DUO
365ASTRONOMY
365Astronomy PHOTO DUO Counterbalance Upgrade Kit with 2 Rods and 2 Counterweights
If you already own a Fornax 10 Lightrack Mark II, an Astrotrac, a Vixen Polarie Star Tracker or a similar mobile tracking mount, this counterweight system would be a great addition to increase the payload of your mount,...
Low stock (1) SKU: VSH36507-UNO
365ASTRONOMY
365Astronomy PHOTO UNO Counterbalance Upgrade Kit with 2 Rods and 1 Counterweight
If you already own a Fornax 10 Lightrack Mark II, an Astrotrac, a Vixen Polarie Star Tracker or a similar mobile tracking mount, this counterweight system would be a great addition to increase the payload of your mount,...
Ask about stock
SKU: APMFORKwithENCODER
APM Telescopes
APM Alt-Azimuth Fork Mount with Encoders
This APM Fork Mount is a result of development of the reknowned Binoptic Fork II mount and like that it also offers you a vibration-free, high load-carrying capacity manual alt-azimuth mount for your Binoculars or...
Ask about stock
SKU: APM-FORK-NEXUS-DSC
APM Telescopes
APM Alt-Azimuth Fork Mount with Encoders and Nexus DSC BUNDLE
This APM Fork Mount is a result of development of the reknowned Binoptic Fork II mount and like that it also offers you a vibration-free, high load-carrying capacity manual alt-azimuth mount for your Binoculars or...
Ask about stock
SKU: 2451150
Baader Planetarium
Baader Short Pillar III without Flange Adapter
Baader Short Pillar III without Flange Adapter Available on back order! Recommended accessories: 2451155 Universal Base-Ring for Baader Short-Steel-Pillar III and 2451115 Baader Tripod Adapter for Celestron...
Ask about stock
SKU: 2451155
Baader Planetarium
Baader Universal Base Ring for Baader Short Steel Pillar III
Universal Base Ring for Baader Short Steel Pillar III (fits Baader Tripod-Adapters onto short Steel-Pillar III)
Available on back order!
Baa-5b-2451155
Low stock (1) SKU: 500760
Berlebach
Berlebach Floor-Protecting Devices for Astronomy Tripods PLANET and UNI - Set of 3
Berlebach astronomy tripods (Planet and Uni series) come with stainless steel tips that are great on the ground, but can be harmful to your floor, especially if it is a vynil floor...
Berlebach came up with a...
In stock (2) SKU: 11178-GP-3/8
Berlebach
Berlebach Photo Adapter for Astro Tripod with Vixen GP Head
Connection on tripod side: female M10 thread. Connection at the top (for camera or ball head etc): 3/8" photo thread. Overall diameter: 88mm. The bottom of the adapter has a flat circular protrusion with 60mm...
In stock (2) SKU: PLANET-EQ6
Berlebach
Berlebach PLANET Wooden Tripod with Tray for Skywatcher EQ6 - Natural Colour
The Berlebach Planet is our most stable wooden tripod, featuring large wood cross-sections and newly designed clamping elements, delivers a high load capacity and excellent stability with minimum vibration transmission....
Low stock (1) SKU: 310026
Berlebach
Berlebach Replacement Plastic Feet for Astronomy Tripods - Set of 3
Berlebach astronomy tripods (Planet, Sky and Uni series) come with stainless steel tips that are great on a grassy or slippery ground when used outdoor, but can be harmful to your floor, especially if it is a vynil...
In stock (2) SKU: UNI18-VIXEN-GP-EQ5
Berlebach
Berlebach UNI 18 Wooden Tripod for Vixen GP and Skywatcher EQ5 with Tray - Natural Colour
The Berlebach UNI 18 is one of the most popular, well-proven UNI tripods for astronomers to upgrade their original steel or aluminium tripod. Vibration damping is far better than thos metal tripods.These are...
In stock (2) SKU: UNI-28AG-BLACK
Berlebach
Berlebach UNI-28AG Black Ash Wooden Tripod
The Berleback UNI-28 AG is an outstanding wooden tripod made to a specific specification requested by Astrograph. Its design provides an extremly stable mounting platform for any mounting system. Our AG specification...
Low stock (1) SKU: UNI-28AG-GREY
Berlebach
Berlebach UNI-28AG Titanium Grey Wooden Tripod
The Berleback UNI-28 AG is an outstanding wooden tripod made to a specific specification requested by Astrograph. Its design provides an extremly stable mounting platform for any mounting system. Our AG specification...
In stock (4) SKU: 93609-NEW-VER
CELESTRON
Celestron Piggyback Mount for Celestron C5, C6, C8, C9.25 and 11-inch Tubes
The Celestron Piggyback Mount is a great accessory for all observers interested in deep-sky astrophotography. This mount allows you to attach your camera, with its lens, to the top of the telescope. Its unique design also...
In stock (2) SKU: 8000515
CELESTRON
Celestron Replacement Hand Control Holder for CPC Telescopes
In case your hand control holder has broken, you may now purchase a replacement holder that is compatible with all current CPC telescope mounts....
In stock (2) SKU: 8000808
CELESTRON
Celestron Replacement Hand Control Holder with Bracket for Advanced VX Telescopes
In case your hand control holder has broken, you may now purchase a replacement holder that is compatible with all current Advanced VX and former CG-5 telescope mounts....
In stock (3) SKU: CS-VD0BLACK
Commlite
Commlite 4-Wheel Desktop Dolly Skater Rail Slider - BLACK
This flexible Desktop Dolly Rail Slider Car will help you to create amazing videos with your camcorder, dSLR or mirrorless camera.
The angle of both wheels can be changed (by appr 45 degrees) to achieve various circular or...
In stock (3) SKU: CS-VD0BLUE
Commlite
Commlite 4-Wheel Desktop Dolly Skater Rail Slider - BLUE
This flexible Desktop Dolly Rail Slider Car will help you to create amazing videos with your camcorder, dSLR or mirrorless camera.
The angle of both wheels can be changed (by appr 45 degrees) to achieve various circular or...
In stock (3) SKU: CS-VD0RED
Commlite
Commlite 4-Wheel Desktop Dolly Skater Rail Slider - RED
This flexible Desktop Dolly Rail Slider Car will help you to create amazing videos with your camcorder, dSLR or mirrorless camera.
The angle of both wheels can be changed (by appr 45 degrees) to achieve various circular or...
In stock (10) SKU: COMM-MINI-BALLHEAD-HOTSHOE
Commlite
Commlite LCD Monitor Adapter 1/4" Mini Ball Head Mount with Hot Shoe Base
This mini ball head can be used to attach a video monitor to your dSRL camera via the hot shoe adapter base at the bottom of the ball head.
There is also a female 1/4" photo thread at the bottom, so this can also be...
In stock (5) SKU: CM-WBH
Commlite
Commlite Waist Belt Buckle - Camera Belt Clip Buckle Camera Hanger Holster
Strong camera hanger for dSLR, bridge, compact and mirrorless cameras. We've tried it with a Canon EOS 7D and a SONY a6000. Although it will carry the weight of the 7D, there are more comfortable options (but much more...
Low stock (1) SKU: ENCODER-KIT-for-Elle-Duo
Tecnosky
Encoder Kit for Tecnosky eLLe Duo Mount
Custom encoder kit for use with the Tecnosky eLLe single arm fork mount. This kit is custom made with cable lengths suited for fitting to the double arm Tecnosky eLLe mount. It assumes the Nexus II or DSC are used. The kit...
Low stock (1) SKU: ENCODER-KIT-for-Elle
Tecnosky
Encoder Kit for Tecnosky eLLe Mount
Custom encoder kit for use with the Tecnosky eLLe single arm fork mount. This kit is custom made with cable lengths suited for fitting to the double arm Tecnosky eLLe mount. It assumes the Nexus II or DSC are used. The kit...
In stock (2) SKU: MAGNETIC-HOLDER-FOR-ELLE
Tecnosky
Magnetic Phone / Tablet Holder for Nexus II Holder Bracket for Tecnosky eLLe Mount
This Magnetic Phone / Tablet Holder is to be installed onto the Nexus II holder via a pre-drilled hole, next to the Nexus II. Its surface is at the level of the Nexus II, so the phone or tablet will nicely placed flat on top...
Low stock (1) SKU: #19230
Optec
Optec Libra Alt-Az Adjustable Mount with Losmandy Platform and Clamp
Features full alt-azimuth control for quick and precise alignment of guidescope with main telescope. Standard Sky-Watcher/Vixen dovetail saddle plate. Fits onto Sky-Watcher tube ring via camera mounting bracket....
In stock (2) SKU: 20148/20798
Optical Vision
OVL SKYTEE-2 Heavy-Duty Dual-Load AltAzimuth Mount & SkyWatcher Stainless Steel Tripod
SKYTEE-2 Heavy-Duty Dual-Load Alt-Azimuth Mount & Tripod. The SKYTEE-2 is a heavy duty alt-azimuth mount capable of holding two telescope tubes of up to 15Kg each in parallel. A Skywatcher/Vixen type dovetail saddle p...
In stock (2) SKU: 20148
Optical Vision
SKYTEE-2 Heavy-Duty Dual-Load AltAzimuth Mount by OVL
FREE SHIPPING TO UK MAINLAND! SKYTEE-2 Heavy-Duty Dual-Load Alt-Azimuth MountThe SKYTEE-2 is a heavy duty alt-azimuth mount capable of holding two telescope tubes of up to 15Kg each in parallel. A Skywatcher/Vixen type...
In stock (4) SKU: 20244
SKYWATCHER
SkyWatcher Guidescope Mount
Features full alt-azimuth control for quick and precise alignment of guidescope with main telescope. Standard Sky-Watcher/Vixen dovetail saddle plate. Fits onto Sky-Watcher tube ring via camera mounting bracket....
In stock (2) SKU: 20798
SKYWATCHER
SkyWatcher Heavy-Duty Tripod for Skytee HEQ5 EQ5 EQ3-2 Mounts
SkyWatcher Heavy-Duty Stainless Steel Tripod for EQ3-2, EQ5, HEQ5 and SKYTEE-2 Mountsto upgrade aluminium tripodA Sky-Watcher 1.75" stainless steel tripod specially designed for EQ3-2, HEQ5, EQ5 and the new Skytee-2...
Ask about stock
SKU: Tecnosky-ELLE-DUO-NO-ENCODER
Tecnosky
Tecnosky eLLe Duo Mount for Binoculars and Small Telescopes with Encoder Mounts (but without Encoders)
The Tecnosky eLLe Duo Alt-Az mount is an elegant and stable full fork mount that can be used on all tripods having a standard 3/8" screw. It can easily handle heavier loads and binocular apertures up to approx...
Ask about stock
SKU: Tecnosky-ELLE-DUO-ENCODER-FULL
Tecnosky
Tecnosky eLLe Duo Mount for Binoculars and Small Telescopes with Encoder Mounts and ENCODERS
The Tecnosky eLLe Duo Alt-Az mount is an elegant and stable full fork mount that can be used on all tripods having a standard 3/8" screw. It can easily handle heavier loads and binocular apertures up to approx...
In stock (2) SKU: Tecnosky-ELLE
Tecnosky
Tecnosky eLLe Mount v2 for Binoculars and Small Telescopes with Encoder Mounts
The Tecnosky Alt-Az Binomount is an elegant and stable single arm Alt-Az fork mount that can be used on all tripods having a standard 3/8" screw. It can easily handle loads up to 8 kgs and binocular apertures...
In stock (2) SKU: Tecnosky-AGTECFIN
Tecnosky
Tecnosky Finder Bracket and Shoe for TecnoSky eLLe Mount
The Tecnosky finder bracket is designed as an accessory for the Tecnosky eLLe Alt-Az mount. It attaches with two screws and allows for the mounting of a conventional finder scope. A standard finder shoe is supplied with the...
Ask about stock
SKU: G4M-6014
TELEVUE
TeleVue Gibraltar HD4 Alt-Azimuth Mount with Wooden Tripod
Our longer, heavier 4" scopes are best matched to the rock-solid Gibraltar HD4 mount. The large bearing surfaces and thick wood legs best handle the loads, especially for high power viewing.
Ask about stock
SKU: G5M-5014
TELEVUE
TeleVue Gibraltar HD5 Alt-Azimuth Mount with Wooden Tripod
TeleVue's Gibraltar HD5 mount mates the rock-solid Gibraltar HD tripod with a larger, heavier alt-az head designed for Televue's 5" scopes. The head is an inch wider than the original Tele-Pod version, has...
In stock (2) SKU: P4M-7011
TELEVUE
TeleVue Panoramic Advanced Alt-Azimuth Mount with Ash Wood Tripod
The Tele-Pod represents the most travel friendly mount for our smaller scopes. For more rigidity under heavier loads, the Tele-Pod head is attached to ash wood legs and tray to become the Panoramic™ mount. Since the...
In stock (3) SKU: PGC-1001
TELEVUE
TeleVue Piggy-Cam Piggyback Mount for TeleVue and Other Telescopes
Secure your camera to Piggy-Cam for greatest flexibility in piggy-back photography. Piggy-Cam's 3/8" thick tilting base plate can be locked at virtually any angle allowing you the most pleasing photo composition. The...
In stock (2) SKU: FT05-TS-TRITON
Teleskop Service
Triton Tabletop Travelling Tripod with Tilting Head - 25-50cm
a very good tripod for travelling with only 28cm transport length - big versatility and equipment - small dimensions and price
In stock (2) SKU: FT02-TS-TRITON
Teleskop Service
Triton Tabletop Travelling Tripod with Tilting Head - 30 - 40cm Height
The Triton FT02 is ideal when compact dimensions and low weight are just as important as stability. So it is a good companion for hiking and travelling.
The tripod and its head are made from solid metal. Due to this...
In stock (2) SKU: TS-A255FS3
Teleskop Service
TS Optics A255FS3 - Ultra-Compact Heavy-duty Tripod for Travelling and Hiking
The TS Optics A255FS3 is ideal for photo safaris, mountain hiking or air travelling. Even long long walks are no problem. The lightweight tripod is always at hand, as it is attached to your belt and not stowed away somewhere...
In stock (2) SKU: TS-BH-51AT
Teleskop Service
TS Optics BH-51AT Compact Ballhead for Photo Tripods
This compact ballhead from TS Optics convinces with optimal properties and a classy workmanship. Through precise manufacturing, this ballhead can carry instruments up to 8 kg despite only 300 grams own weight. In general, the...
In stock (2) SKU: TS360
Teleskop Service
TS Optics Panorama Head and 360° Rotary Plate - load capacity 20 kg
This heavy duty, professional quality ball head will serve you as a general ball head for any dSLR camera up to 10kg payload, and as such, we also warmly recommend it to be used with our new Fornax 10 LighTrack Mark II mobile...
Low stock (1) SKU: TS-BH-58A
Teleskop Service
TS Optics TS-BH-58A Extra Heavy-Duty Ballhead for Photo Tripods - up to 15kg Payload
This massive ballhead from TS Optics convinces with a very good and classy workmanship. Through precise manufacturing, this ballhead can carry instruments up to 15 kg despite its own little weight being only 0.79kg. In...
Ask about stock
SKU: UNIQBALL-G250
Uniqball
Uniqball G250 Gimbal Bridge 250 for Gimbal/Nodal Slide Application
This multifunctional, 250 mm long slide provides extended features and thus enhances the applicability of Uniqball heads. The primary goal achieved with this accessory slide is the endowment of Uniqball UBH heads with...
Low stock (1) SKU: UNIQBALL-G320
Uniqball
Uniqball Gimbal Bridge 320 (DoubleGimbal)
This multifunctional, 320 mm long slide provides extended features and thus enhances the applicability of Uniqball heads. The primary goal achieved with this accessory slide is the endowment of Uniqball UBH heads with...
Ask about stock
SKU: UNIQBALL-UCPan
Uniqball
Uniqball PanoClamp (Uniqball panorama panning base)
This fully rotating (360°) clamp is an essential device for shooting panoramas and panned videos and is specifially designed for Uniqball heads.
Ask about stock
SKU: UNIQBALL-UBH35X
Uniqball
Uniqball UBH35X ALL-IN-ONE System Leveled Pan & Tilt Head, Gimbal Head and Ball Head with a Leveling Base
A revolutionary invention created by the finest engineering and craftsmanship directly from Europe. UNIQBALL Model UBH 35 is recommended for up to medium sized telephoto lenses: 100-400mm F5.6, 50-500mm F/6.3, 300mm F/4, 300mm...
Low stock (1) SKU: UNIQBALL-UBH45X
Uniqball
Uniqball UBH45X ALL-IN-ONE System Leveled Pan & Tilt Head, Gimbal Head and Ball Head with a Leveling Base
A revolutionary invention created by the finest engineering and craftsmanship directly from Europe. UNIQBALL Model UBH 45 is recommended for up to medium sized telephoto lenses: Recommended for any telephoto lens, including...
Low stock (1) SKU: UNIQBALL-UBH45XC
Uniqball
Uniqball UBH45XC ALL-IN-ONE System Leveled Pan & Tilt Head, Gimbal Head and Ball Head with a Leveling Base
A revolutionary invention created by the finest engineering and craftsmanship directly from Europe. UNIQBALL Model UBH 45 is recommended for up to medium sized telephoto lenses: Recommended for any telephoto lens, including...
Ask about stock
SKU: UNIQBALL-UPL70
Uniqball
Uniqball UPL 70 Quick Release Plate
The Uniqball UPL70 is a universal quick release plate for Uniqball ballheads. Dimensions: 70 mm x 38 mm, 1/4" securing screw, with removable anti-slip-screws, 2 allen wrenches, universal quick release plate for cameras,...
Low stock (1) SKU: UNIQBALL-UPL100
Uniqball
Ask about stock
SKU: UNIQBALL-UPL125
Uniqball
In stock (2) SKU: UNIQBALL-UPL85
Uniqball
Low stock (1) SKU: UNIQBALL-UCX
Uniqball
UNIQBALL X Cross-clamp (Bidirectional clamp) UBH45 resents only
This is a special clamp enabling UBH45 heads to accept the bidirectional (x or y) mounting of camera bodies and lenses.
Low stock (1) SKU: PL1000025
Primaluce Lab
Primaluce Lab 5A PSU AC Adapter for EAGLE
We would recommend this PSU for your Eagle if you run a simpler sustem with a dSLR or planetary imager camera or a non-cooled CCD camera or similar, plus low consumption heating and a Skywatcher EQ5, HEQ5 , Celestron VX mount...
In stock (2) SKU: PL1000024-12.8V
Primaluce Lab
Primaluce Lab 10A 12.8V PSU AC Adapter for EAGLE
We would recommend this PSU for your Eagle if you run a complex system, with a larger mount like Skywatcher EQ6, AZ-EQ6, EQ8, Celestron CGEM, CGEM DX, CGE PRO, Fornax 52, Fornax 100, Fornax 150 or similar, with cooled CCD,...
In stock (2) SKU: PL1000024-12V
Primaluce Lab
Primaluce Lab 10A 12V PSU AC Adapter for EAGLE
We would recommend this PSU for your Eagle if you run a complex system, with a larger mount like Skywatcher EQ6, AZ-EQ6, EQ8, Celestron CGEM, CGEM DX, CGE PRO, Fornax 52, Fornax 100, Fornax 150 or similar, with cooled CCD,...
In stock (2) SKU: PLLFLAZEQ5
Primaluce Lab
Primaluce Lab PLUS Adapter Plate (Puck) for AZ-EQ5 Mount
It is compatible with the Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE. It might also be compatible with other clamps...
In stock (2) SKU: PLLFLEQ6
Primaluce Lab
Primaluce Lab PLUS Adapter Plate (Puck) for EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro and AZ/EQ6-G Mounts
It is compatible with the Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE. It might also be compatible with other clamps...
In stock (2) SKU: PLLFLHEQ5
Primaluce Lab
Primaluce Lab PLUS Adapter Plate (Puck) for HEQ5 and Sirius EQ-G Mounts
It is compatible with the Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE. It might also be compatible with other clamps...
In stock (5) SKU: PLLMORVLP
Primaluce Lab
Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible
We would recommend this PSU for your Eagle if you run a complex system, with a larger mount like Skywatcher EQ6, AZ-EQ6, EQ8, Celestron CGEM, CGEM DX, CGE PRO, Fornax 52, Fornax 100, Fornax 150 or similar, with cooled CCD,...
In stock (2) SKU: PLLMORVLPB
Primaluce Lab
Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE
These large dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the...
In stock (2) SKU: PLLMORVLPB-EQ6
Primaluce Lab
Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE Clamp for EQ6 Mount
This Large Vixen+Losmandy PLUS Dovetail Clamp for EQ6 allows to install Vixen or Losmandy type dovetail bars on Skywatcher EQ6 telescopes mounts. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for...
In stock (2) SKU: PLLMORVLPB-HEQ5
Primaluce Lab
Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE Clamp for HEQ5 Mount
This Large Vixen+Losmandy PLUS Dovetail Clamp for HEQ5 allows to install Vixen or Losmandy type dovetail bars on Skywatcher HEQ5 telescopes mounts. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter...
In stock (2) SKU: PLLMORVLPB-AZEQ5
Primaluce Lab
Primaluce Lab PLUS Premium Dovetail Clamp Vixen / Losmandy Compatible - LARGE for AZ-EQ5 Mount
This Big Dovetail Clamp Vixen+Losmandy PLUS for AZ-EQ5 allows to install Vixen or Losmandy type dovetail bars on Skywatcher HEQ5 telescopes mounts. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter...
Ask about stock
SKU: 365651
365ASTRONOMY
365Astronomy 365651 Mini Wedge
The 365Astronomy Mini Wedge is designed to act as an equatorial wedge for simple motorized mounts such as the Fornax 10 LighTrack, Astrotrac and Vixen Polarie etc. When combined with the GR-Mini Head, Counter Weight Shaft and...
Low stock (1) SKU: AGTO-CLAMPSTD
Tele-Optic
Tele-Optic Prism Clamp Standard
The Prism Clamp is the standard clamp offered for all Tele-Optic mounts. It is small yet very strong and will hold instruments of considerable weight firmly and safely. Two Prism Clamps can be fitted to the Ercole mount for...
Low stock (1) SKU: Lac-AZ3fft
Lacerta
High Quality Tripod Adapter Plate for AZ3 Alt-Azimuth Mount
BACK IN STOCK NOW! HIGH QUALITY TRIPOD ADAPTOR/ADAPTER PLATE FOR AZ3 ALT-AZIMUTH MOUNT with CORK COVER 1/4-20 Adaptor Plate to allow the attachment of equipment via a standard tripod bush, includes a pair of screws to fix the ...
In stock (3) SKU: Lac-EQ1fft
Lacerta
High Quality Tripod Adapter Plate for EQ1 Equatorial Mount
HIGH QUALITY TRIPOD ADAPTOR/ADAPTER PLATE FOR EQ1 GERMAN EQUATORIAL MOUNT with CORK COVER 1/4-20 Adaptor Plate to allow the attachment of photographic equipment via a standard tripod bush, includes a pair of screws to fix the...
In stock (2) SKU: EQ2fft
Lacerta
Lacerta High Quality Tripod Adapter Plate for EQ2 Equatorial Mount
HIGH QUALITY TRIPOD ADAPTOR/ADAPTER PLATE FOR EQ2 GERMAN EQUATORIAL MOUNT with CORK COVER 1/4-20 Adaptor Plate to allow the attachment of photographic equipment via a standard tripod bush, includes a pair of screws to fix the...
In stock (2) SKU: EQ3fft
Lacerta
Tripod Adapter Plate Dovetail Bar for EQ3 Equatorial Mount
Please note, the current version is black anodised aluminium. We would also recommend you to consider the EQ5 version (EQ5fft) that is functionally the same just much longer (hence its higher price). HIGH...
Low stock (1) SKU: EQ5fft
Lacerta
Tripod Adapter Plate Dovetail Bar for EQ5 Equatorial Mount
HIGH QUALITY TRIPOD ADAPTOR/ADAPTER PLATE FOR EQ5 GERMAN EQUATORIAL MOUNTS (can also be used with EQ3 or any other EQ/Vixen compatible mounts) 1/4-20 Adaptor Plate to allow the attachment of photographic equipment...
In stock (2) SKU: PSFotoDel
Teleskop Service
TSOptics Dovetail Mounting Bar Vixen Style - 120 mm Long with Slotted Hole and Screw with 1/4" Photo Thread
TS dovetail plate to adapt spotting scopes and sameras to mounts with GP level adaption. This solid dovetail plate allows you to attach heavy cameras, spotting scopes, telephoto lenses ... to an astronomical mount. One...
In stock (2) SKU: 20995
SKYWATCHER
L-Bracket Camera Platform for Porta, Merlin, AZ GOTO, Autotrack
HIGH QUALITY L-BRACKETCamera Platform for Porta, Merlin, AZ GOTO, Autotrack and Other Mounts with Quick ReleaseAn L-shaped Adaptor Plate to allow the attachment of photographic equipment via a standard tripod bush (1/4-20...
In stock (3) SKU: Lac-PLATL
Lacerta
L-Bracket Camera Platform for Porta, Merlin, GIAZ, Autotrack
HIGH QUALITY L-BRACKETCamera Platform for Porta, Merlin, GIAZ, Autotrack and Other Mounts with Quick Release An L-shaped Adaptor Plate to allow the attachment of photographic equipment via a standard tripod bush (1/4-20...
Low stock (1) SKU: TS-LBracket
Teleskop Service
TS Optics L-Bracket for Large Binoculars and Spotting Scopes
HIGH QUALITY L-BRACKET Camera Platform for Porta, Merlin, AZ GOTO, Autotrack and Other Mounts with Quick Release An L-shaped Adaptor Plate to allow the attachment of photographic equipment via a standard tripod bush (1/4-20...
Ask about stock
SKU: 72661
Vixen
Vixen Dovetail Tube Plate 19cm
Dovetail Tube Plate / Dovetail Mounting Bar for Vixen and other compatible telescope mounts (e.g. EQ3-2, EQ5, CG-5 etc)...
Low stock (1) SKU: Lac-SINmer
Lacerta
Balancing Dovetail Bar - Camera Platform for Porta, Merlin, GIAZ, Autotrack
Camera Platform for Porta, Merlin, GIAZ, Autotrack and Other Mounts with Quick ReleaseCan also be combined with the optional L-BRACKET An adapter plate of standard length (185mm) to allow the attachment of photographic equipme...
Low stock (1) SKU: Lac-SINmerL
Lacerta
Balancing Dovetail Bar - Extra Long Camera Platform for Porta, Merlin, GIAZ, Autotrack
Camera Platform for Porta, Merlin, GIAZ, Autotrack and Other Mounts with Quick ReleaseCan also be combined with the optional L-BRACKET An extra long (285mm) adapter plate to allow the attachment of photographic equipment via a...
In stock (2) SKU: 20999
SKYWATCHER
SkyWatcher Tripod Adapter - Adaptor Plate for AZ3 Alt-Azimuth Mount
SKYWATCHER TRIPOD ADAPTOR / ADAPTER PLATE FOR AZ3 ALT-AZIMUTH MOUNT 1/4-20 Adaptor Plate to allow the attachment of equpment via a standard tripod bushThis adaptor plate allows use of spotting scopes, cameras and accessories...
In stock (3) SKU: VSPF36502-CLAMP
SKYWATCHER
365Astronomy Lightweight Aiming Platform and Heavy-Duty Guidescope Mount
Full alt-azimuth control for quick and precise alignment of guidescope with main telescope. Standard Sky-Watcher/Vixen dovetail bar at the bottom and Sky-Watcher/Vixen compatible clamp at the top.
Features one 3/8"...
In stock (4) SKU: VSPF36502-CAMERA
365ASTRONOMY
365Astronomy Lightweight Aiming Platform for dSLR Camera and Guidescope Mount
The main purpose of this product is precise alignment of a celestial object when shooting with a dSLR camera or with a small telescope. It could also be used for full alt-azimuth control for quick and precise alignment of...
Ask about stock
SKU: 2451115
Baader Planetarium
Baader Tripod Adapter Flange for Celestron CGEM Mounts
suitable for Celestron CGEM mount; suitable for the Baader T-Pod Heavy Duty Aluminium Tripod 75-110cm / 95-130cm and Baader Hardwood Tripods
Ask about stock
SKU: 2451145
Baader Planetarium
Baader Tripod Adapter Flange for Celestron NexStar SE and Nexstar EVOLUTION Mounts
Suitable for Celestron NexStar SE / EVO Telescope (altazimuth) mount or wedge. Suitable for the Baader T-Pod Aluminium Tripod 75-110cm / 95-130cm and Baader Hardwood Tripod.
Ask about stock
SKU: 2451108
Baader Planetarium
Baader Tripod Adapter Flange for EQ-6, NEQ-6 and AZEQ-6
Suitable for Celestron / Sky-Watcher, EQ-6, NEQ-6 und AZEQ-6 mounts. Suitable for the Baader T-Pod Aluminium Stativ 75-110cm and Baader Hardwood Tripods.
Ask about stock
SKU: 2451112
Baader Planetarium
Baader Tripod Adapter Flange for Zeiss 1B Mount
Suitable for Zeiss 1b mount. Suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod.
Ask about stock
SKU: 2451116
Baader Planetarium
Baader Tripod Adapter for Celestron CGEM DX and CGE Pro Mounts
Suitable for Celestron CGEM-DX- and CGE-Pro mounts. Suitable for the Baader T-Pod Aluminium Tripod 75-110cm / 95-130cm and Baader Hardwood Tripods
Ask about stock
SKU: 2451120
Baader Planetarium
Baader Tripod Adapter for Paramount MX Mounts
Suitable for Paramount MX mounts. Suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
Ask about stock
SKU: 2451107
Baader Planetarium
Baader Tripod Adapter for Vixen Sphinx Mount
Suitable for Vixen Sphinx mount. Suitable for the Baader T-Pod Aluminium Stativ 75-110cm / 95-130cm and Baader Hardwood Tripods.
- per page
