TS CCD Adapter for Canon EOS Lens to T2 with 18.5mm Optical Length
T2 CCD Adapter for Canon EOS camera lenses (EFS and EF )
Canon EOS objective adapter to T2 - connects your Canon lens to a CCD camera.
It also allows to adapt accessories through a T2 (M42x0.75) thread to your Canon EOS camera lens
Above picture: Atik camera with Canon lens (not included)
You have a high-resolution CCD camera and a sharp Canon lens? With this adapter, you can connect both to each other for wide field imaging via the T2 system.
The adapter set consists of:
- Canon EOS "female" Adapter for the lens (with female EOS bayonet)
- Three extension tubes with 6.8, 13.8 and 28.1 mm length (the above two are practically model number TSEOS-GRUND)
- Short male T2 Adapter (optical length of the two together: appr. 18.0-18.5mm) TSM60i-T2a
Canon lenses have a back focus of 44mm. The shortest adapter length is appr. 18.0-18.5 mm. So you have 25.5mm of back focus you can use e.g. for a filter wheel or short off-axis-guider. If such accessories are not needed, the distance can be bridged by the included spacers or optional M48 extensions.
Short adaptation of 1.25" filters between lens and camera:
Baader offers a 1.25" filter holder with continuous T2 male thread (1508030). With the TS counterparts T2i-T2i and T2Konter you can integrate 1.25" filters into this combination or a variable T2 extension from 6.5 through 10mm.