TS CCD Adapter for Canon EOS Lens to T2 - EXTRA SHORT VERSION - 10mm Optical Length only
TEMPORARILY UNAVAILABLE! (We try to convince the manufacturer to keep this product alive, but we don't know yet if this will happen...)
In the meantime you might consider to go for the M48 version of this product. Click here!
TS Extra Short T2 CCD Adapter for Canon EOS camera lenses (EFS and EF ) with 10mm optical length.
Canon EOS objective adapter to T2 - connects your Canon lens to a CCD camera. It also allows to adapt accessories through a T2 (M42x0.75) thread to your Canon EOS camera lens...
34mm backfocus from the T2 thread to the sensor!
Left picture: Atik camera with Canon lens (not included)
You have a high-resolution CCD camera and a sharp Canon lens? With this adapter, you can connect both to each other for wide field imaging via the T2 system. This short adapter is a real problem solver from TS.
You have 34mm optical way from the T2-thread to the sensor position. So there is space enough for most of the popular CCD cameras.
Specifications of the adapter:
-- Canon EOS "female" Adapter for the lens
-- Thread on the camera site ... T2 (M42x0,75) 4 mm long
-- length of the adapter ... 10 mm (without T2 thread)
The correct distances:
Canon lenses have a back focus of 44 mm. The adapter length is 10 mm. So you have 34mm of backfocus you can use e.g. for a filter wheel or short off-axis-guider. If such accessories are not needed, the distance can be bridged by T2 extensions (see "accessories" section).
Short adaptation of 1.25" filters between lens and camera:
Baader offers a 1.25" filter holder with continous T2 male thread (BA1508030). With our counterparts (T2i-T2i) and "T2Konter" you can integrate 1.25" filters into this combination or a variable T2 extension from 6.5 through 10 mm.