Starway 85mm Guidescope Rings - 1 pair
This is a set of two Starway Guidescope clampshells for guidescopes with tube diameter between 30mm to 80mm
The TS clampshells are solidly made from metal and are intended for smaller scopes.
The screws have a plastic tip to prevent the guiding scope from scratches.
You can use your old beginner's refractor as a good guiding scope or mount your viewfinder really solid to your main scope.
-- Connection thread: M6. the threaded base is flat and 22mm wide.
-- Smallest possible inner diameter: 20mm.
-- Ring diameter: 85mm.
-- The rings are completely made from metal for maximum stiffness.
Compatible with M6 screws. M6 screws are not supplied as each installation might be different depending on the type of dovetail bar used with need for different length of a screw.
|Weight in Kg||0.85|