- per page
In stock (2) SKU: A508317null
Lacerta
Adapter from 2" to 1.25" with 2" Filter Thread - ZERO Optical Path
Adapts from 2" nosepiece to 1.25" Nosepiece Holder with 2" inner thread for your specialised deepsky, colour or other filter. ZERO OPTICAL PATH!
Ask about stock
SKU: FDM10R
Farpoint Astro
FARPOINT Dovetail Radius Blocks, Meade 10" SCT Telescopes
Dovetail plate / bar is not included.
Image is for demonstration only, shows Radius Blocks of various sizes and the usual packaging on the left.
Beautifully machined, black anodised radius blocks (2 pcs).
Stainless...
In stock (2) SKU: FDM8R
Farpoint Astro
FARPOINT Dovetail Radius Blocks, Meade 8" SCT Telescopes
Dovetail plate / bar is not included.
Image is for demonstration only, shows Radius Blocks of various sizes and the usual packaging on the left.
Beautifully machined, black anodised radius blocks (2 pcs).
Stainless...
Low stock (1) SKU: #19230
Optec
Optec Libra Alt-Az Adjustable Mount with Losmandy Platform and Clamp
Features full alt-azimuth control for quick and precise alignment of guidescope with main telescope. Standard Sky-Watcher/Vixen dovetail saddle plate. Fits onto Sky-Watcher tube ring via camera mounting bracket....
Ask about stock
SKU: PLLANSU113P
Primaluce Lab
Primaluce Lab 113mm PLUS Tube Rings for AIRY ED100
The 113mm PLUS support rings are supplied with AIRY ED100 apochromatic refractor but they can be used with other brands telescopes (for example refractors 100mm in diameter) with tube approximately 113mm in diameter. With this...
In stock (2) SKU: PLLANSU115P
Primaluce Lab
Primaluce Lab 115mm PLUS Tube Rings for Vixen VSD, Vixen AX103S, Vixen ED103D, Takahashi TSA102 etc
The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the...
Ask about stock
SKU: EQ5-tripod-spreader
SKYWATCHER
Skywatcher Replacement Tripod Spreader for EQ5 Mount
In case you lost or broke the tripod spreader on your Skywatcher EQ5 mount, here is the original replacement part.
Ask about stock
SKU: 365630-tub75
SKYWATCHER
SkyWatcher 76mm Tube Mounting Rings
76MM TUBE MOUNTING RINGS (1 PAIR) for 70mm Skywatcher (and similar) Refractor Telescope Tubes, Diameter=74-75mm, without internal soft cover: 76mm ...
In stock (3) SKU: 20527-WHITE
SKYWATCHER
SkyWatcher 182mm Tube Mounting Rings for 150mm Newtonians - WHITE
This is a pair of tube rings for a 150mm Newtonian telescope. Inner diameter of a ring is 182-183mm....
Low stock (1) SKU: PLLANSU122P
Primaluce Lab
Primaluce Lab 122mm PLUS Tube Rings
The support rings PLUS 122mm are supplied with AIRY APO120 apochromatic refractor but can be used with other brands telescopes (for example refractors 120mm in diameter) with tube approximately 122mm in diameter. With...
In stock (3) SKU: PLLANSU125P
Primaluce Lab
Primaluce Lab 125mm PLUS Tube Rings for Takahashi FSQ106 and Similar Telescopes
The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below...
In stock (2) SKU: PLLANSU134P
Primaluce Lab
Primaluce Lab 134mm PLUS Tube Rings for SkyWatcher Esprit 100ED and Similar Telescopes
The 134mm PLUS support rings are designed telescopes with tube approximately 134mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our...
In stock (2) SKU: PLLLOS140P
Primaluce Lab
Primaluce Lab 140mm PLUS Losmandy Plate - Dovetail Bar
The Losmandy plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in...
In stock (3) SKU: PLLVIX140P
Primaluce Lab
Primaluce Lab 140mm PLUS Vixen Plate - Dovetail Bar
The Vixen plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts...
In stock (3) SKU: PLLLOS240P
Primaluce Lab
Primaluce Lab 240mm PLUS Losmandy Plate - Dovetail Bar
The Losmandy plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors...
In stock (2) SKU: PLLVIX240P
Primaluce Lab
Primaluce Lab 240mm PLUS Vixen Plate - Dovetail Bar
The Vixen plate 240mm PLUS is part of our PLUS system (Prima Luce Universal System) that includes a large variety of other plates, support rings, guide rings and dovetail clamps to offer you the maximum...
Low stock (1) SKU: PLLLOS350P
Primaluce Lab
Primaluce Lab 350mm PLUS Losmandy Plate - Dovetail Bar
The Losmandy plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to...
In stock (4) SKU: PLLVIX350P
Primaluce Lab
Primaluce Lab 350mm PLUS Vixen Plate - Dovetail Bar
The Vixen plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 350mm long and is useful for installing compact telescopes (as refractors up to 120mm and Newton 200mm...
In stock (2) SKU: PLLLOS495P-NEW
Primaluce Lab
Primaluce Lab 495mm PLUS Losmandy Plate - Dovetail Bar - NEW VERSION
The Losmandy plate 495mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 495mm long and is useful for installing medium dimensions telescopes (such as refractors up to...
In stock (3) SKU: PLLVIX90P
Primaluce Lab
Primaluce Lab 90mm PLUS Vixen Plate - Dovetail Bar
The Vixen plate 90mm PLUS is designed to let you install your telescopes on mounts with this plate. This plate is 90mm long and is useful for installing compact telescopes (i.e. refractors with up to 75mm aperture) on mounts...
In stock (3) SKU: PLLANGU115P
Primaluce Lab
Primaluce Lab Guide Rings PLUS 115mm
If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 115mm offer a high build quality and all the features useful...
In stock (3) SKU: PLLANGU80P
Primaluce Lab
Primaluce Lab Guide Rings PLUS 80mm
If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this...
In stock (2) SKU: PLL-CONTRPLUS
Primaluce Lab
Primaluce Lab PLUS 1 Kg Counterweight
This Primaluce Lab PLUS 1kg counterweight is an important accessory to counterbalance your optical system. It is compatible with the Primaluce Lab dovetail clamp and provides an excellent way to offset an unbalanced optical...
In stock (6) SKU: PLLSPES10
Primaluce Lab
Primaluce Lab PLUS 10mm Spacers
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some elements touch each others. That's why we created the PLUS...
In stock (2) SKU: PLLSPES20
Primaluce Lab
Primaluce Lab PLUS 20mm Spacers
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some elements touch each others. That's why we created the PLUS...
In stock (3) SKU: PLLSPES30
Primaluce Lab
Primaluce Lab PLUS 30mm Spacers
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some elements touch each others. That's why we created the PLUS...
In stock (2) SKU: PLL-CONTRPLUS-M
Primaluce Lab
Primaluce Lab PLUS Dovetail Clamp with 1 Kg Counterweight
The PLUS dovetail clamp with 1 Kg counterweight can be connected to any Vixen or Losmandy style dovetail bar for a proper counterbalance, when you can't have a perfect weight balance by moving the telescope in its...
In stock (5) SKU: 365667-VSP
365ASTRONOMY
365Astronomy Vibration Suppression Pads VSP
Reducing vibration is important for visual observations, but it is essential when taking images with your telescope.Vibration is being caused by various human or natural factors. I.e. we might cause vibration when we walk...
Ask about stock
SKU: VSDP36502
365ASTRONOMY
365Astronomy Dovetail Bar / Mounting Bar - Vixen Compatible - 13cm Long
Vixen compatible mounting bar / dovetail barIt is compatible with Vixen style telescope mounting clamps. Black anodised aluminium alloy construction .Weight: 114g Length: 130mmWidth (at widest part at the bottom): 43mm...
In stock (10) SKU: VSDP36515
365ASTRONOMY
365Astronomy Dovetail Bar / Mounting Bar - Vixen Compatible - 18cm Long
Vixen compatible mounting bar / dovetail barIt is compatible with Vixen style telescope mounting clamps. Black anodised aluminium alloy construction .Weight: 114g Length: 180mm Width (at widest part at the bottom): 43mm...
In stock (3) SKU: VSDP36513
365ASTRONOMY
Large Mounting Platform / Clamp for Losmandy-style Dovetail Bars - Black
This large clamp will fit Losmandy compatible plates. It is also compatible with "D" sized Farpoint, Celestron CGEM or CGE dovetail bars, used on Celestron CGEM, CGE Pro and Skywatcher EQ6, AZ-EQ6, EQ8 etc. mounts....
In stock (6) SKU: VSDP36512CLAMP
365ASTRONOMY
LARGE Universal Deluxe Mounting Platform / Clamp - Vixen / Losmandy Compatible - Red / Gold
LARGE Universal Deluxe Mounting Platform / Clamp - Vixen / Losmandy Compatible - Red / Gold
In stock (5) SKU: VSDP36507CLAMP
365ASTRONOMY
LARGE Universal Mounting Platform / Clamp - Vixen Compatible - ALUMINIUM with BRASS PRESSION BLOCK
Deluxe universal Mounting Platform - Clamp. See image for sizes, wholes and threads of this universal telescope mounting clamp / platform. .It is compatible with Vixen style telescope mounting plates and bars.
In stock (3) SKU: VSDP36514
365ASTRONOMY
Mini Mounting Platform / Clamp for 38 - 43mm Wide Photographic Dovetail Bars - Red
This is not a Vixen compatible clamp. It has been designed for narrower dovetail bars, those used in the photographic industry. I.e. it is compatible with the dovetail bar of our Optolong supplied DEO-Tech Drop-In Filter...
In stock (5) SKU: VSDP36506CLAMP
365ASTRONOMY
SMALL Universal Mounting Platform / Clamp - Vixen Compatible - ALUMINIUM with BRASS PRESSION BLOCK
Deluxe universal Mounting Platform - Clamp. See image for sizes, wholes and threads of this universal telescope mounting clamp / platform. .It is compatible with Vixen style telescope mounting plates and bars.
In stock (2) SKU: PSA30
Teleskop Service
Starway Dovetail Bar - Vixen Style - 28cm Long - Solid Aluminium
These solid aluminium rails were made for heavy telescope loads.
With 475 g, they are a bit heavier than profiled plates, but the stability is better. The plates can be moved forwards and backwards for balancing.
The...
In stock (6) SKU: VSDP36501
365ASTRONOMY
Universal Mounting Platform / Clamp - Vixen Compatible - WHITE
See image below for sizes, wholes and threads of this universal telescope mounting clamp / platform.It is compatible with Vixen style telescope mounting plates/bars. It is the WHITE version. Black version is also available...
In stock (5) SKU: TS-PrismenklemmeS
Teleskop Service
Vixen-style Mounting Platform / Dovetail Clamp - SILVER
Dovetail clamp - Vixen GP standardRigid dovetail clamp that fits to all dovetail rails with Vixen GP connectivity. It has similar measurements as the Vixen GP/ Skywatcher EQ or Celestron Advanced GOTO/CG-5 mounts.This...
Low stock (1) SKU: TS-DoppelS
Teleskop Service
Starway Dual Mounting Platform for Celestron Nexstar SE
Starway Dual Mounting Platform - SHORT VERSION A compact side-by-side mounting plate, compatible with Vixen / EQ / CG-style dovetails Similar in function to our larger Dual mount, this variant is used when there is little...
In stock (2) SKU: TS-Schnellkup
Teleskop Service
Starway Quick Release Dovetail Adapter for EQ2 EQ3
Quick release dovetail adapter for mounts with normal saddle plateThe quick release dovetail adapter allows a quick and solid connection of your telescope at your mount. Instead of tediously bolting and unbolting of the tub...
Ask about stock
SKU: 1501655
Baader Planetarium
Baader 3" Telescope Mounting Dovetail Plate - Losmandy Style Dovetail Bar, 190mm Long
For Losmandy / Astro Physics (large) / Celestron (large) Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm.
Ask about stock
SKU: LosEQ8
Lacerta
Lacerta 334mm Telescope Mounting Plate - Losmandy Style Dovetail Bar
Compatible with Skywatcher EQ8, Celestron CGX and similar mounts that use Losmandy/CGE-style clamps.
In stock (2) SKU: PLAT2-Doppelbefestigung
Teleskop Service
TS Dual Side-by-Side Telescope Mounting Plate - Vixen Style
TS Dual Mount - Side-by-Side Telescope Mounting Plate for setting up two telescopes on one mount - Vixen CompatibleMainly - but not exclusively - used for mounting a guiding telescope next to (in parallel with) the main...
In stock (2) SKU: TS-L50-SBS
Teleskop Service
TS Starway 500mm Dual Side-by-Side Telescope Mounting Plate - Losmandy Style for Two Optical Tubes
Starway dual mount for two telescopes on one mount with wide distance for big telescopes The optical axes of the two clamps are 430mm away that allows to mount very large telescopes next to each other Losmandy-type clamp on...
In stock (3) SKU: TS-PS3-V
Teleskop Service
PS3-V Adapter Rail to Convert Vixen Dovetail to Losmandy or CGEM
Starway Adapter Rail for Optical Telescope Tubes with Vixen or Skywatcher EQ-type Dovetails and Telescope Mounts with 3" (Celestron CGE or Losmandy) Dovetail ClampsHere is a solution if you want to mount a telescope...
In stock (2) SKU: 94213
CELESTRON
Celestron Universal Mounting Plate CG-5-Compatible
Celestron Universal Mounting Plate - compatible with CG-5 mount (or similar mounts, like the Skywatcher EQ-5)The universal mounting plate attaches to the mounting platform of your CG-5 equatorial mount. It allows you...
In stock (2) SKU: 94214
CELESTRON
Celestron Universal Mounting Plate CGE-Compatible
Celestron Universal Mounting Plate - CGE-compatible Manuals 94214 Mounting Plate Manual (English, Frenc...
In stock (2) SKU: 2451734
Baader Planetarium
Baader V (EQ) Dovetail Bar Orange Anodised Drilled for Celestron 8" SCT Optical Tubes
Baader Vixen (EQ) Compatible Dovetail Bar, Orange Anodised, Drilled for Celestron 8" SC and HD TelescopesTechnical specificationDistance between holes at two ends: appr. 312mmAt one end there is one hole (unthreaded),...
In stock (2) SKU: 2451745
Baader Planetarium
Baader V (EQ) Dovetail Bar Orange Anodised Drilled for Celestron 9.25 and 11 inch SCT Optical Tubes
Baader Vixen (EQ) Compatible Dovetail Bar, Orange Anodised, Drilled for Celestron 9.25" and 11" SC and HD Telescopes. Due to high demand we try to keep this product in stock all the time.Image is for demonstration...
In stock (2) SKU: 94216
CELESTRON
Celestron 8-inch Dovetail Bar CGE-Compatible
Celestron 8" Dovetail Bar - CGE-compatibleAlternative products:Baader 3" Dove Tail Bar 470mm (18,5") longFARPOINT Dovetail Plate for Celestron 8" SCT Losmandy Compatible ...
In stock (3) SKU: 94217
CELESTRON
Celestron 9.25-inch Dovetail Bar CGE-Compatible
Celestron 9.25" Dovetail Bar - CGE-compatibleSpecification (approximate values, measured screw center to center)Length: 438mmLength between the two holes at one end and the one hole at the other end is appr 411.5 to 420...
In stock (3) SKU: 94219
CELESTRON
Celestron 11-inch Dovetail Bar CGE-Compatible for EdgeHD OTA
Celestron 11" Dovetail Bar - CGE-compatible for 11" EdgeHD OTA’sA CGE fit Dovetail Bar to fit 11" SCT and EdgeHD telescopes. The CGE fit is a standard size for higher end mounts and is compatible with...
Low stock (1) SKU: 94218
CELESTRON
Celestron 14-inch Dovetail Bar CGE-Compatible
Celestron 14" Dovetail Bar - CGE-compatible(Please note, image shows the 8" bar)Please note, it's too long for posting via Royal Mail, hence the virtually increased shipping weight to cover shipping by a courier....
In stock (2) SKU: 20549
SKYWATCHER
SkyWatcher SHORT 15cm Mounting Plate
Custom-made for Sky-Watcher EQ3, EQ5, HEQ5 and EQ6 Mounts. These mounting plates can be adapted to fit any standard Intes mounting plate (customer required to drill/tap both mounting plates as necessary) for the secure moun...
In stock (2) SKU: 20758
SKYWATCHER
SkyWatcher MEDIUM 21cm Dovetail Mounting Bar
Custom-made for Sky-Watcher EQ3, EQ5, HEQ5 and EQ6 Mounts. These mounting plates can be adapted to fit any standard Intes mounting plate (customer required to drill/tap both mounting plates as necessary) for the secure moun...
In stock (3) SKU: 20759
SKYWATCHER
SkyWatcher LONG 33.5cm Dovetail Mounting Bar
Custom-made for Sky-Watcher EQ3, EQ5, HEQ5 and EQ6 Mounts. These mounting plates can be adapted to fit any standard Intes mounting plate (customer required to drill/tap both mounting plates as necessary) for the secure moun...
Low stock (1) SKU: BTC-kup-VL
Lacerta
Dovetail Accessory Adapter/Clamp 16cm Combined Vixen & Losmandy
Combined Dovetail Accessory Adapter / Clamp for both Vixen & Losmandy Plates/bars/railsLength: 16.5cmThis combined clamp will fit both Vixen and Losmandy compatible plates. Also, it won't leave marks on your plate as...
Low stock (1) SKU: BTC-kup-VLL
Lacerta
Fornax Dovetail Accessory Adapter - Dual Clamp 26cm - Vixen & Losmandy Compatible
Combined Dovetail Accessory Adapter / Clamp for both Vixen & Losmandy Plates/bars/railsLength: 26cmThis combined clamp will fit both Vixen and Losmandy compatible plates. Also, it won't leave marks on your plate as the...
In stock (3) SKU: FDUP
Farpoint Astro
FARPOINT Long Universal Dovetail Plate - Losmandy Compatible
FARPOINT LONG Universal Dovetail Bar/Plate - Losmandy StyleLength: 14" (356mm)IN STOCK NOW!Universal dovetail bar, 14" long with a variety of mounting holes for various scopes and mounts and general purpose use....
In stock (2) SKU: FDUPS
Farpoint Astro
FARPOINT Short Universal Dovetail Plate - Losmandy Compatible
FARPOINT SHORT Universal Dovetail Bar/Plate - Losmandy Style Length: 7" (178mm)Short universal dovetail bar, with a variety of mounting holes for various scopes and mounts and general purpose use. Especially for...
In stock (2) SKU: FMDUP
Farpoint Astro
FARPOINT Long METRIC Universal Dovetail Bar Losmandy Compatible
FARPOINT LONG METRIC Universal Dovetail Bar/Plate - Losmandy Style Length: 10" (254mm)Long universal dovetail bar, with 60mm longitudinal hole spacing and various M6 threaded holes for William Optics and similar...
In stock (3) SKU: FDBB
Farpoint Astro
FARPOINT Breadboard-Style Multi Purpose Dovetail Bar 6" Long
FARPOINT Breadboard-style Multi Purpose Dovetail Bar / Plate - Losmandy Style Length: 6" (152mm)Short universal dovetail plate / bar, 6" long multi purpose "D" size dovetail bar with 1/4-20 tapped holes and...
In stock (3) SKU: FMDUPS
Farpoint Astro
FARPOINT Short METRIC Universal Dovetail Bar Losmandy Compatible
FARPOINT SHORT METRIC Universal Dovetail Bar / Plate - Losmandy Style Length: 7" (180mm)IN STOCK NOW!Short universal dovetail plate / bar, with 60mm longitudinal hole spacing and various M6 threaded (middle ends) and...
In stock (3) SKU: FDTV
Farpoint Astro
FARPOINT TELEVUE Dovetail Plate - Losmandy Compatible
FARPOINT TeleVue Dovetail Bar / Plate - Losmandy StyleShort dovetail plate / bar to install a Tele Vue clamshell on it only. Losmandy Compatible - fits mounts with 3" wide quick coupling. Beautifully machined, black...
Low stock (1) SKU: FDC8R
Farpoint Astro
FARPOINT Dovetail Radius Blocks, Celestron 8" SCT Telescopes
FARPOINT Radius Block Set (set of two) for Celestron C8 SCT Telescopes - to attach "D" size (Losmandy Style) Dovetail Bar / Plate - Dovetail plate / bar is not included. Image is for demonstration only, shows Radius...
Low stock (1) SKU: FDC9.25R
Farpoint Astro
FARPOINT Dovetail Radius Blocks, Celestron 9.25" SCT Telescopes
FARPOINT Radius Block Set (set of two) for Celestron C9.25 SCT Telescopes - to attach "D" size (Losmandy Style) Dovetail Bar / Plate - Dovetail plate / bar is not included. Image is for demonstration only, shows...
In stock (2) SKU: PLLSAG925
Primaluce Lab
Primaluce Lab PLUS Curved Blocks Radius Blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" Telescopes
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope...
Ask about stock
SKU: FDC11R
Farpoint Astro
FARPOINT Dovetail Radius Blocks, Celestron 11" SCT Telescopes
FARPOINT Radius Block Set (set of two) for Celestron C11 SCT Telescopes - to attach "D" size (Losmandy Style) Dovetail Bar / Plate - Dovetail plate / bar is not included. Image is for demonstration only, shows Radius...
In stock (2) SKU: FDC8
Farpoint Astro
FARPOINT Dovetail Plate for Celestron 8" SCT Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Celestron C8 Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Celestron C8 SCT (8-inch Schmidt Cassegrain...
In stock (2) SKU: FDC9.25S
Farpoint Astro
FARPOINT Dovetail Plate for NEW Celestron C925 SCT Losmandy Style
FARPOINT SHORT Dovetail Bar / Plate for 2008 Black Celestron C925 Schmidt Cassegrain Telescopes - Losmandy StyleLength: 17.25" (438mm) Hole Spacing: 16.0 / 16.5"Dovetail plate / bar including radius blocks (hanging...
Ask about stock
SKU: FDC9.25L
Farpoint Astro
FARPOINT Dovetail Plate for OLD Celestron C925 SCT Losmandy-Style
FARPOINT LONG Dovetail Bar / Plate for OLDER Celestron C925 Schmidt Cassegrain Telescopes - Losmandy StyleLength: 18.9" (480mm) Hole Sapcing: 17.25" (438mm)Dovetail plate / bar including radius blocks (hanging...
In stock (2) SKU: FDC11
Farpoint Astro
FARPOINT Dovetail Plate for Celestron C11 SCT - Losmandy Style
FARPOINT Dovetail Bar / Plate for Celestron C11 Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Celestron C11 SCT (11-inch Schmidt Cassegrain...
Low stock (1) SKU: FDC14
Farpoint Astro
FARPOINT Dovetail Plate for Celestron C14 SCT - Losmandy Style
FARPOINT Dovetail Bar / Plate for Celestron C14 Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Celestron C14 SCT (14-inch Schmidt Cassegrain...
Ask about stock
SKU: FDHDC14
Farpoint Astro
FARPOINT Heavy Duty Dovetail Bar Celestron C14 - Losmandy Style
Astrophotorgraphers - Attention!FARPOINT Heavy Duty Dovetail Bar / Plate for Celestron C14 Schmidt Cassegrain Telescopes - Losmandy Style Dovetail plate / bar including radius blocks (hanging brackets) to fit a Celestron C14...
Low stock (1) SKU: FVUP
Farpoint Astro
FARPOINT Universal Vixen Style Dovetail Bar with a Variety of Hole Patterns
FARPOINT Universal Vixen Style Dovetail Bar with a Variety of Hole Patterns
Low stock (1) SKU: FVC11
Farpoint Astro
FARPOINT Vixen Style Dovetail Bar for Celestron 11" SCT OTA with Radius Blocks
FARPOINT Vixen Style Dovetail Bar for Celestron 11" SCT OTA with Radius Blocks for Celestron 11" SCT telescope tube
Low stock (1) SKU: FVC8
Farpoint Astro
FARPOINT Vixen Style Dovetail Bar for Celestron 8" SCT OTA with Radius Blocks
FARPOINT Vixen Style Dovetail Bar for Celestron 8" SCT OTA with Radius Blocks for Celestron 8" SCT telescope tube
Low stock (1) SKU: FVC9.25S
Farpoint Astro
FARPOINT Vixen Style Dovetail Bar for Celestron 9.25" SHORT SCT OTA with Radius Blocks
FARPOINT Vixen Style Dovetail Bar for Celestron 9.25" SHORT SCT OTA with Radius Blocks
Compatible with Celestron 9.25" SCT telescopes from 2008 and newer.
In stock (2) SKU: FVS2D
Farpoint Astro
FARPOINT Vixen to "D" (Losmandy) Dovetail Bar Adapter
Allows the mounting of a telescope with Vixen style dovetails onto a “D” sized (Losmandy style) telescope mount.
Ask about stock
SKU: FDM7
Farpoint Astro
FARPOINT Dovetail Plate for Meade 7" MAK - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 7-inch Maksutov Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 7" MAK (7-inch Maksutov Cassegrain...
In stock (3) SKU: FDM8
Farpoint Astro
FARPOINT Dovetail Plate for Meade 8" SCT - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 8-inch Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 8" SCT (8-inch Schmidt Cassegrain...
Low stock (1) SKU: FDM10
Farpoint Astro
FARPOINT Dovetail Plate for Meade 10" SCT - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 10-inch Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 10" SCT OTA (10-inch Schmidt Cassegrain...
Low stock (1) SKU: FDM12
Farpoint Astro
FARPOINT Dovetail Plate for Meade 12" SCT - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 12-inch Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 12" SCT (12-inch Schmidt Cassegrain...
Low stock (1) SKU: FDM14
Farpoint Astro
FARPOINT Dovetail Plate for Meade 14" SCT - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 14-inch Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 14" SCT (14-inch Schmidt Cassegrain...
Low stock (1) SKU: FDM16
Farpoint Astro
FARPOINT Dovetail Plate for Meade 16" SCT - Losmandy Compatible
FARPOINT Dovetail Bar / Plate for Meade 16-inch Schmidt Cassegrain Telescopes - Losmandy StyleDovetail plate / bar including radius blocks (hanging brackets) to fit a Meade 16" SCT (16-inch Schmidt Cassegrain...
In stock (2) SKU: 20999
SKYWATCHER
SkyWatcher Tripod Adapter - Adaptor Plate for AZ3 Alt-Azimuth Mount
SKYWATCHER TRIPOD ADAPTOR / ADAPTER PLATE FOR AZ3 ALT-AZIMUTH MOUNT 1/4-20 Adaptor Plate to allow the attachment of equpment via a standard tripod bushThis adaptor plate allows use of spotting scopes, cameras and accessories...
In stock (3) SKU: FDTCS
Farpoint Astro
FARPOINT 7" Dovetail Plate for Takahashi Clamshell "D" Sized
FARPOINT "D" Sized (Losmandy "D" Size) Dovetail Bar / Plate for Takahashi ClamshellLength: 7", One Mounting PositionLosmandy Compatible - fits mounts with 3" wide quick coupling. Beautifully...
In stock (2) SKU: FTAK01DP
Farpoint Astro
FARPOINT 12.5" Dovetail Plate for Takahashi Clamshell "D" Sized
FARPOINT Dovetail Bar for Takahashi Clamshell Takahashi clamshell to "D" sized dovetail bar with two mounting positionsLosmandy Compatible - fits mounts with 3" wide quick coupling.With two mounting...
Ask about stock
SKU: FTAK01QR
Farpoint Astro
FARPOINT Quick Release Bracket for Takahashi Finders
FARPOINT Quick release Bracket for Takahashi Finders Specifications1 hole at each end (2 all together) at 28mm distance from each other on both parts4 screws included (2 screws for telescope side and another 2 screws for...
Ask about stock
SKU: FDR90
Farpoint Astro
FARPOINT 90mm I.D. Dovetail GuideScope Rings for 3" Rails
FARPOINT 90mm Inner Diameter Dovetail Rings - Guide Scope Rings with Quick Coupling Clamps for 3" Losmandy Style RailA pair of dovetail rings (guidescope rings) including quick coupling clamps. No tools needed to attach...
In stock (3) SKU: 20153
SKYWATCHER
SkyWatcher 7Ah Rechargeable Power Tank
Sky-Watcher 7Ah 12V Rechargeable Power Tank NEW: now with 2 x 5V USB outputs(Please let us know if you wanted the original version with 3V, 6V and 9V outputs as we might have one of that version still available...)SkyWatcher...
Ask about stock
SKU: 20154
SKYWATCHER
SkyWatcher 17Ah Rechargeable Power Tank
Sky-Watcher 17Ah 12V Rechargeable Power Tank 250A Cranking Amp, Jump Start System – 5 sec Multi-function rechargeable power supply for use with Sky-Watcher SynScan and SupaTrak mountings Radio – AM/FM/SIREN 250A...
Ask about stock
SKU: FDR108
Farpoint Astro
FARPOINT 108mm I.D. Dovetail GuideScope Rings for 3" Rails
FARPOINT 108mm Inner Diameter Dovetail Rings - Guide Scope Rings with Quick Coupling Clamps for 3" Losmandy Style RailSet of twoA pair of dovetail rings (guidescope rings) including quick coupling clamps. No tools needed...
In stock (2) SKU: FDR125
Farpoint Astro
FARPOINT 125mm I.D. Dovetail GuideScope Rings for 3" Rails
FARPOINT 125mm Inner Diameter Dovetail Rings - Guide Scope Rings with Quick Coupling Clamps for 3" Losmandy Style RailSet of twoIN STOCK NOW!A pair of dovetail rings (guidescope rings) including quick coupling clamps. No...
Ask about stock
SKU: FDR160
Farpoint Astro
FARPOINT 160mm I.D. Dovetail GuideScope Rings for 3" Rails
FARPOINT 160mm Inner Diameter Dovetail Rings - Guide Scope Rings with Quick Coupling Clamps for 3" Losmandy Style RailSet of twoIN STOCK NOW!A pair of dovetail rings (guidescope rings) including quick coupling clamps. No...
In stock (8) SKU: FDA
Farpoint Astro
FARPOINT Dovetail Accessory Adapter / Clamp for 3" Rails
FARPOINT Dovetail Accessory Adapter - Quick Release Mount - Quick Coupling Clamp for 3" Losmandy Style RailsDovetail accessory adapter. Quick relase mount for dovetail bar accessories.No tools needed to attach the clamp...
In stock (12) SKU: FVA
Farpoint Astro
FARPOINT Dovetail Accessory Adapter / Clamp for EQ Rails
FARPOINT Dovetail Accessory Adapter - Quick Release Mount - Quick Coupling Clamp for EQ/Vixen Style Rail. Dovetail accessory adapter. Quick relase mount for dovetail bar accessories.No tools needed to attach the c...
In stock (3) SKU: FDCM
Farpoint Astro
FARPOINT Dovetail Accessory Adapter / Dovetail Camera Mount and Clamp for 3" Rails
Attaches a camera (or another accessory that uses a tripod mount) to a quick release saddle. The quick release saddle can attach to any D size dovetail plate (dovetail plate not included).
In stock (2) SKU: FVSBS
Farpoint Astro
FARPOINT Side by Side Saddle for Vixen Style Dovetail Bars
Side by side saddle for Vixen style dovetail bars that allows mounting of two telescopes on one mount.
In stock (3) SKU: FVS
Farpoint Astro
FARPOINT Vixen Style Saddle / Clamp
FARPOINT Vixen Style Saddle - Clamp - Dovetail Accessory Adapter - Quick Release Mount - Quick Coupling Clamp for EQ/Vixen Style RailsIN STOCK NOW!Dovetail accessory adapter. Quick relase mount for dovetail bar...
- per page
