C-Mount Adapter from 1.25" with M28.5 filter thread. Outer diameter: 1.25". C-mount thread on one end and 1.25" (M28.5) filter thread on the other end.
C-Mount Adapter from C-Mount to T-2On the top of the image you can see the female C-Mount inner thread. At the bottom there is a male T-thread visible. This is to connect photographic dSLR cameras to a microscope with male...
C-Mount Adapter from T2 to C-mountOn the above image you can see the male C-Mount thread. On the other side (not visible on the image) there is a female T-thread. ...
C-Mount Adapter / Extension from C-Mount to T-2 (M42 CS Adapter)On the top of the image you can see the female C-Mount inner thread. At the bottom there is a male T-thread visible. One use of this adapter is to connect...
C-Mount Adapter for Microscopes External 23.2mm nosepiece and C-mount male threadLength of nosepiece: 23.2mmDiameter of nosepice: 23.2mmOptical length: 3.4-3.5mm (that's the thickness of that obstructing part on the side...
Microscope Adapter - with male M42 (outer) thread and 1.25" (31.7mm) barrelThis adapter screws into the trinocular camera exit of the BTC BIM-12T-type or similar microscopes. On the top of the item you can see the...
Microscope Adaptor from male M24 (outer) to male T-2 (outer) threadOn the top of the item you can see the male M24 outer thread. At the bottom there is a male T-thread visible. This is to connect photographic dSLR cameras to...
Eyepiece Adapter for Microscopes, outer diameter 30.0mm and inner diameter 23.3mm (to allow 23.2mm eyepiecesLength of nosepiece: 24.6mmDiameter of nosepice: 30.0mmOptical length: that's a good question... 5.6mm is the...
Eyepiece Adapter for Microscopes with outer diameter 30.5mm and inner diameter 23.3mm (to allow 23.2mm eyepiecesLength of nosepiece: 26mmDiameter of nosepice: 30.5mmOptical length: that's a good question... 2.1mm is the...
A quick message for those who might have thought to miss this promotion is that due to the fact that 1 Jan was a bank holiday followed by a weekend, we decided to end it on the morning on the first working day of the year: 9am on Monday, 4 January 2021.
So from now you will still have about 36-37 hours to make a decision... The following camera are in this promotion:
ASI071MC-PRO (APS-C sized),
ASI6200MC-PRO (full frame) ASI6200MM-PRO (full frame) and various bundles with this monochrome camera,
ASi2400MC-PRO (full frame, large pixels),
ASI1600GT (with built-in filter wheel),
ASI183GT (with built-in filter wheel),
ASI2600MC-PRO (APS-C sized) (one of the most popular cameras these days),
ASI533MC-PRO (smaller square filter, but extremely popular) ASI1600MMP-KIT3 (this is the only camera that will stay on promotion till stocks last),
ASI462MC-PRO (currently the best and most popular planetary camera due to its extreme sensitivity in near IR),
ASI120MC-S and ASI120MM-S (no introduction needed - our longest selling planetary imagers and guide cameras),
and finally but not lastly at all: ASIAIR PRO (and BUNDLES) - the must have all rounder astro photographer's brain and power center for your ZWO camera: for aligning, locating, guiding and imaging, etc. - all in one...
Hope you can find something on the above list that might be worth considering!
Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
Background
The TS 8-inch RC has M90x1mm connections at the focuser end of the scope. My setup has a TS
50mm extension adapter with for 6- & 8-inch RC connected to the scope (TS part no: GSRCV50),
to accommodate the long back-focus.
Attached to this is a TS M90 tilting adapter flange (TS part no: GSRCJ90). This is an aid to
collimation and allows the long axis of the focuser to be aligned with the optical axis of the scope.
I then have a standard TS monorail focuser for the RC, again with an M90x1 connection.
Image 1 shows the 50mm extension and tilting flange, with the old focuser removed. Note the M90
male thread at the end of the flange, to which the focuser connects.
Fitting the Baader Diamond Steeltrack RT
It is assumed that the reader has access to the Steeltrack manual and has purchased the necessary
RT-Adapter M90x1 Diamond Steeltrack (Baader part nu...
PLEASE READ IT! IMPORTANT! COVID-19 and STOCK AVAILABITITY INFO:
Please note that currently we receive about 10 times more phone calls, 3-4 times as many emails, orders etc. whilst we work with reduced staff, so please be patient.
PRICE CHANGE!!! We've received new pricelists for BRESSER, EXPLORE SCIENTIFIC, LUNT and VIXEN products receintly. It will take several days to update the prices, so we cannot guarantee to acceptance of orders for these brands at the current prices. We would recommend to wait till Monday, 18 January to place any orders (or call us to confirm the price and availability before ordering).
PLEASE CONTACT US TO CHECK CURRENT AVAILABILITY BEFORE YOU ORDER ANY SKYWATCHER, CELESTRON, BAADER, BRESSER, LUNT, TS and ZWO PRODUCTS (and possibly some others as well), AS STOCK LEVELS FLUCTUATE AND WE JUST CANNOT UPDATE THE LEVELS IN REAL TIME...
If you have an urgent inquiry, please call Zoltan on his mobile during working hours (Mon-Fri 9am-5pm)
Please send a text or WhatsApp message to Zoltan ONLY if you failed to call him or if it is extremely urgent. His mobile has been flooded with messages as well...
079 1278 4737 (international format: + 44 79 1278 4737)
Thanks for your patience!
Keep safe and healthy!
sidenote... TO THE ATTENTION OF OUR INTERNATIONAL CUSTOMERS!
EU CUSTOMERS: We have temporarily disabled European destinations whilst we adjust our system to the new VAT rules. Hopefully we'll be able to resume shipments to EU countries soon.
USA CUSTOMERS: shipping to the USA is active again, but we request customers to confirm product availability before placing an order! If you are ordering an MGEN-3, no need to check stock, we've got plenty of those. Please note, we will try to avoid sending goods via a postal service due to the huge delays and as DHL Express is more expensive than our system would currently charge for, we might have to charge extra depending on the value and size of the ordered goods.
Please note, due to the increased number if issues with postal services to most directions (especially Australia, Canada etc), we will only ship to these countries on the base of special request and depending on the value and size of the products. This is a temporary measure and we hope to supply worldwide again as soon as the situation improves.
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.