JMI MFC9 Motofocus for Celestron C9.25 SCT
JMA MOTOFOCUS for Celestron 9¼" SCT, Celestron C9¼-S, C9¼-SGT, CG-9¼, CGE 925, G-9¼, NexStar 9¼ GPS, Ultima 9¼
CURRENTLY UNAVAILABLE... The new owner of JMI, Optical Structures will come out with a new, modern version of this product that is expected in the Autumn 2018.
Compatible with HitecAstro's AAHitecDCFocus Basic DC Controller
MOTOFOCUS is a battery operated hand control with an electric focus motor that attaches to the shaft of a focuser knob (or the knob itself) for precise, vibration-free focusing without the need to touch the telescope. It is great for visual and photographic use and features variable speed for coarse and fine adjustments. Precise positioning is accomplished through electronic braking. Mounting is easy and requires no drilling or tapping. Add the optional Digital Read Out (DRO), or Digital Focus Counter (DFC), for improved focusing accuracy and repeatability.
Due to changes in Celestron 9.25 inch telescopes, please verify the correct MOTOFOCUS part number using the following chart (this product listing is for MFC9):
|Identifying the Correct MOTOFOCUS for a Celestron 9¼" SCT (Chart 1)|
|Part No.||Style||Identifying Characteristics|
|MFC9||Classic||Rectangular plate (scope housing) at base of focus knob|
|MFC9||NexStar||Rectangular plate (scope housing) at base of focus knob|
|MFC8||CPC||Orange Ring (scope housing) at base of focus knob|
The pictures below show the steps to install the Celestron 9.25 SCT MOTOFOCUS.
1. Remove the original focus knob and cover plate (top left).
2. Install the replacement knob (top right).
3. Install the replacement cover plate and attached collar (bottom left).
4. Place the motor sleeve over the collar and tighten the thumb screw (bottom right).
5. Plug in the hand control unit and you are ready to go. It's that easy!
Available on back order. ETA: 2-6 weeks.
Main image is for demonstration only.
Now watch on YouTube. (might show a different MotoFocus unit, but operation is the same or similar)
|Weight in Kg||1.1|