- per page
In stock (4) SKU: 362521-M48-2-inch-Helical
365ASTRONOMY
2" Non-rotating Helical Micro Focuser with M48-thread and 0.1mm Scale
Non-rotating Helical Micro Focuser with M48 male thread for full frame camera connection and M48 female thread on telescope side with a 2" nosepiece included and 0.1mm scale for very precise focusing, 40mm focus travel...
In stock (2) SKU: VSCF36505
365ASTRONOMY
365Astronomy 1.25" Non-rotating Helical Micro Focuser with 0.05mm Scale for Right Angled Synta/GSO D50 Finderscope
Non-rotating Helical Microfocuser with Male 50.8mm thread for right angled Synta/GSO 50mm Finderscope, 1.25" eyepiece holder with brass compression ring and 0.05mm scale for very precise focusing. The attached accessory...
In stock (10) SKU: VSCF36503-HELICAL
365ASTRONOMY
365Astronomy 1.25" Non-rotating Helical Micro Focuser with T-thread and 0.05mm Scale
Non-turning Helical Microfocuser with T-thread, 1.25" eyepiece holder with brass compression ring and 0.05mm scale for very precise focusing.The attached accessory (i.e. camera) stays in position when you turn the...
In stock (10) SKU: 362522
365ASTRONOMY
365Astronomy 1.25" Non-rotating Pull-Out Fine Focuser with Female T-thread with 10mm Focus Travel
This is NOT a Helical Microfocuser and it comes with a female rather than male T-thread, however this would still provide a smooth manual movement and cam be a cheap alternative to a helical-type focuser
In stock (3) SKU: 365HELIROT
365ASTRONOMY
365Astronomy 1.25" Rotating Helical Focuser with Male T-thread Connection
Rotating Helical Focuser with Male T-thread, 1.25" eyepiece holder with two thumbscrews and 29mm focus travel
Please note, the attached accessory (i.e. eyepiece or camera) will rotate when you turn the focusing as...
Ask about stock
SKU: 365596B
365ASTRONOMY
365Astronomy Imaging Flip Mirror Camera Adapter - 1.25" Variable Eyepiece Holder
If your astro photography camera comes with a 1.25" nosepiece and you want to use it with our Imaging Flip Mirror, this camera adapter will let you attach your camera to the Imaging Flip Mirror. ...
In stock (10) SKU: 365596A
365ASTRONOMY
365Astronomy Imaging Flip Mirror Visual Back - 1.25" Eyepiece Holder
If your astrophoto camera comes with a 1.25" nosepiece & you want to use it with a Imaging Flip Mirror, this 1.25" visual back (1.25" eyepiece holder) will let you attach your camera to the Imaging Flip...
In stock (5) SKU: VV365M36T2
365ASTRONOMY
365Astronomy M36.4 to T-thread Adapter
Could possibly be used for Lacerta and Borg 1.25" Non-rotating Helical Micro Focusers and probably other applications as well. Male T-thread (M42x0.75mm) on one side. Female M36.4mm thread on the other side.
Ask about stock
SKU: Lac-MicHelT2
Lacerta
M36.4 to T-thread Adapter for 1.25" Non-rotating Helical Micro Focuser
Lacerta M36.4 to T-thread Adapter for Lacerta and Borg 1.25" Non-rotating Helical Micro Focuser
Ask about stock
SKU: #19750
Optec
Optec Gemini Low-Profile Focusing Rotator System
Optec engineers have developed a completely new concept for combining telescope focus and camera rotation functions into a single robust, yet compact package. Rather than simply adding a rotator onto the end of a focuser...
Ask about stock
SKU: PLLARCO48
Primaluce Lab
Primaluce Lab ARCO48 Robotic Camera Rotator
ARCO is a low-profile, lightweight robotic camera rotator specifically designed to connect to a ESATTO robotic focuser without the need of external data or power cables.
In stock (2) SKU: TSFOCR30
Teleskop Service
TS-Optics 3" Dual Speed Rack and Pinion Focuser - Holds Accessory up to 6kg - 110mm Focus Travel
For many years, Teleskop Service have looked for an alternative to high end focusers for an affordable price . Now we can offer a very good high-end focuser for an incredible price. At the focuser end we choosed to use todays...
In stock (2) SKU: UNCN2-S
Teleskop Service
TS-Optics Dual-Speed 2" Short-Profile UNC Newton Crayford Focuser - Only 50mm Height
The TSUNC2-S is a short-built focuser with only 50 mm profile height. This makes it one the most compact focusers among its price range competitors. The short build and the remarkable build-quality make the UNCN2-S an ideal...
In stock (2) SKU: UNCN2M90
Teleskop Service
TS-Optics Dual-Speed 2" UNC V-Power Crayford Focuser with M90 Thread for RC Telescopes
The TSUNC2M90 is a high quality focuser for highest accuracy. It holds heavy accessories and is designed for astrophotography and demanding observation. The short length and the excellent craftmanship makes this focuser one of...
In stock (2) SKU: UNCN2
Teleskop Service
TS-Optics Dual-Speed 2" UNC V-Power Newton Crayford Focuser - Short
Short 2" Newtonian focuser with only 60 mm height, suitable for accessories up to 6 kg - a very good focuser for astro photography. Oversized ball bearings and V2A stainless steel bearing surface for maximal load and...
In stock (2) SKU: MonorailM90
Teleskop Service
TS-Optics MONORAIL Dual-Speed 2" Crayford Focuser with M90 Thread for RC Telescopes
This focuser is more stable and more accurate than usual Crayford focusers. We recommend the focuser especially for astrophotography when used with comparatively lightweight equipment, i.e. up to max. 3-4kg load.
In stock (2) SKU: TSFOCSCM
Teleskop Service
TSOptics Dual-Speed 2-inch Crayford Focuser for SCT Telescopes
2" Schmidt Cassegrain Focuser with 1:10 micro transmission and 1.25" reducer. Focusing a Schmidt-Cassegrain is sometimes a problem because of the mirror shifting thus making sharp astro photos or critical...
In stock (6) SKU: Micfoc-s
Lacerta
Lacerta Dual Speed 1:10 Microfocus Upgrade Kit for Skywatcher Crayford Focusers
Lacerta 1:10 Microfocus Unit - Dual-Speed Crayford Focuser UpgradeThis is a high quality but economical solution to upgrade your Single Speed Skywatcher Crayford Focuser.Compatible with all Dobson and Newton (from 20cm diam...
In stock (2) SKU: 2957220
Baader Planetarium
Baader 2" BDS-SC Diamond Steeltrack SC/HD Focuser for Schmidt-Cassegrain and EdgeHD Telescopes
The new, highly anticipated Baader Diamond Steeltrack is here now! Available from UK stock! The Baader Diamond Steeltrack range of focusers offer a complete, high quality and high load manual or motorised focusing solution for...
In stock (2) SKU: 07080
MEADE
Meade Zero Image Shift Electronic Micro-Focuser for LX200-ACF, LX600 and Meade LS Telescopes
This high precision, ultra smooth focuser allows you to obtain an extremely accurate image focus. Perfect for astrophotography or during high power planetary observation. Focus is controlled through the existing Autostar II or...
In stock (2) SKU: 2957210
Baader Planetarium
Baader 2" BDS-RT Diamond Steeltrack RT Focuser for Refractor Telescopes
The new, highly anticipated Baader Diamond Steeltrack is here now! Available from UK stock! The Baader Diamond Steeltrack range of focusers offer a complete, high quality and high load manual or motorised focusing solution for...
In stock (2) SKU: 2957204
Baader Planetarium
Baader 2" BDS Steeltrack M48 Adapter
The new, highly anticipated Baader Diamond Steeltrack is here now! Available from UK stock! The Baader Diamond Steeltrack range of focusers offer a complete, high quality and high load manual or motorised focusing solution for...
Ask about stock
SKU: 2957230
Baader Planetarium
Baader 2" BDS-NT Diamond Steeltrack NT Focuser for Newtonian Telescopes
The new, highly anticipated Baader Diamond Steeltrack is here now! Available from UK stock! The Baader Diamond Steeltrack range of focusers offer a complete, high quality and high load manual or motorised focusing solution for...
Ask about stock
SKU: 08-CS-GOLD-FR3.25SCT-0.95FR-DUAL
MOONLITE
Moonlite CS Model DUAL Speed Crayford Focuser for 3.3" SC with 0.95" Travel, Focal Reducer Drawtube & Brass Compression Ring - Gold/Orange Colour
This is a high precision Moonlite CS Model DUAL Speed Crayford Focuser for Celestron 11" and 14" SCT, Celestron 9.25" Edge HD with 3.29" thread and Meade 10", 12" and 14" SC telescopes with...
Ask about stock
SKU: 01-CS-GOLD-FR2SCT-0.95FR
MOONLITE
Moonlite CS Model Single Speed Crayford Focuser for 2" SC with 0.95" Travel, Focal Reducer Drawtube & Brass Compression Ring - Gold/Orange Colour
This is a high precision Moonlite CS Model Single Speed Crayford Focuser for 8" and 9.25" Celestron or 8" Meade telescopes with 2" SC-thread. Comes with 0.95" Travel, Focal Reducer Drawtube &...
Ask about stock
SKU: 02-CS-RED-FR2SCT-0.95FR
MOONLITE
Moonlite CS Model Single Speed Crayford Focuser for 2" SC with 0.95" Travel, Focal Reducer Drawtube & Brass Compression Ring - RED Colour
This is a high precision Moonlite CS Model Single Speed Crayford Focuser for 8" and 9.25" Celestron or 8" Meade telescopes with 2" SC-thread. Comes with 0.95" Travel, Focal Reducer Drawtube & Brass...
In stock (2) SKU: 03-CS-GOLD-FR3.25SCT-0.95FR
MOONLITE
Moonlite CS Model Single Speed Crayford Focuser for 3.3" SC with 0.95" Travel, Focal Reducer Drawtube & Brass Compression Ring - Gold/Orange Colour
This is a high precision Moonlite CS Model Single Speed Crayford Focuser for Celestron 11" and 14" SCT, Celestron 9.25" Edge HD with 3.29" thread and Meade 10", 12" and 14" SC telescopes with...
In stock (2) SKU: 04-CS-RED-FR3.25SCT-0.95FR
MOONLITE
Moonlite CS Model Single Speed Crayford Focuser for 3.3" SC with 0.95" Travel, Focal Reducer Drawtube & Brass Compression Ring - RED Colour
This is a high precision Moonlite CS Model Single Speed Crayford Focuser for Celestron 11" and 14" SCT, Celestron 9.25" Edge HD with 3.29" thread and Meade 10", 12" and 14" SC telescopes with...
In stock (2) SKU: 05-MS-WMIV2
MOONLITE
Moonlite High Resolution Stepper Motor with Mini Controller V2
Moonlite High Resolution Stepper Motor with Power Slip Clutch and Mini Controller V2 (model MTS-500-V2) for Moonlite Focusers This version comes with installation brackets for 2" CS and CF models of Moonlite focusers....
Ask about stock
SKU: 10-CF-BLACK-4.5FR-DS-SW80
MOONLITE
Moonlite CF DUAL Speed Crayford Focuser for Skywatcher Refractors with 4.5" Travel with Compression Ring - BLACK Colour
This is a high precision Moonlite CF Model 2" Dual Speed Speed Crayford Focuser for Skywatcher Refractor Telescopes. This Dual Speed version also comes with a Shaft-Lock mechanism on the coarse knob side. Comes with...
Ask about stock
SKU: 10-CF-RED-4.5FR-DS-SW80
MOONLITE
Moonlite CF DUAL Speed Crayford Focuser for Skywatcher Refractors with 4.5" Travel with Compression Ring - RED Colour
This is a high precision Moonlite CF Model 2" Dual Speed Speed Crayford Focuser for Skywatcher Refractor Telescopes. This Dual Speed version also comes with a Shaft-Lock mechanism on the coarse knob side. Comes with...
Ask about stock
SKU: 07-CR-RED-2COMP-DUAL-W-LOCK
MOONLITE
Moonlite CR2 DUAL Speed Crayford Focuser for Newtonians with 2" Travel with Compression Ring - RED Colour
This is a high precision Moonlite CR2 Model 2" Dual Speed Speed Crayford Focuser for Newtonian Telescopes. This Dual Speed version also comes with a Shaft-Lock mechanism on the coarse knob side. Comes with 2" Travel...
In stock (2) SKU: 09-CR-UIK-10-INCH
MOONLITE
MoonLite Universal Installation Kit for CR Model Focusers for 10" Newtonian Tube
Moonlite Universal Install kits are designed for the MoonLite CR model focusers. Fits all 5", 6",8", 10", 12", 14" and 16" Newtonian scopes such as Orion, Sky Watcher, Celestron , Vixen,...
Ask about stock
SKU: 06-CR-UIK-6-INCH
MOONLITE
MoonLite Universal Installation Kit for CR Model Focusers for 6" Newtonian Tube
Moonlite Universal Install kits are designed for the MoonLite CR model focusers. Fits all 5", 6",8", 10", 12", 14" and 16" Newtonian scopes such as Orion, Sky Watcher, Celestron , Vixen,...
Low stock (1) SKU: 94155
CELESTRON
Celestron Focuser Motor for SCT, Edge HD and RASA Telescopes
Compatible with most focusers, install it in place of the micrometer knob and connect it to the USB port of your EAGLE or Windows computer to remotely control without vibration and with high precision your telescope's...
In stock (2) SKU: PL8410001
Primaluce Lab
Primaluce Lab 2" Visual Back (Eyepiece Holder Barrel) for ESATTO 2"
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This...
In stock (2) SKU: PL8410002
Primaluce Lab
Primaluce Lab 2" Visual Back (Eyepiece Holder Barrel) for ESATTO 3"
If you want to use your telescope visually with ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81 thread of the focuser draw tube....
In stock (4) SKU: SESTOSENSO-AD33
Primaluce Lab
Primaluce Lab 33mm Adapter for SESTO SENSO
This 33mm adapter is installed on the focuser instead of the 2 knobs (macrometric and micrometric), then you can install SESTO SENSO. Together with this adapter, you will find in the package the longer bushing that is used to...
In stock (4) SKU: SESTOSENSO-AD33-MarkII
Primaluce Lab
Primaluce Lab 33mm Mark II Adapter for SESTO SENSO 2
This 33mm adapter allow you to install SESTO SENSO 2 on focusers that come with 33mm diameter large shaft, like the 2,5" and 3" FeatherTouch (or other focusers with 33mm diameter large shaft). SESTO SENSO 2, as...
In stock (3) SKU: SESTOSENSO-AD37
Primaluce Lab
Primaluce Lab 37mm Adapter for SESTO SENSO
This 37mm adapter allow you to install SESTO SENSO on focusers that come with 37mm diameter large shaft, like the 3,5" FeatherTouch and FSQ-130 (or other focusers with 37mm diameter large shaft). SESTO SENSO as standard...
In stock (3) SKU: SESTOSENSO-AD37-MarkII
Primaluce Lab
Primaluce Lab 37mm Mark II Adapter for SESTO SENSO 2
This 37mm adapter allow you to install SESTO SENSO 2 on focusers that come with 37mm diameter large shaft, like the 3,5" FeatherTouch and FSQ-130 (or other focusers with 37mm diameter large shaft). SESTO SENSO 2, as...
In stock (2) SKU: PL3600235
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and GSO/Orion/TPO Ritchey-Chretien 6" and 8" Telescopes
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO...
In stock (2) SKU: PL3600230
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and SkyWatcher/Orion ED80, ED100 and ED120 Telescopes
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By...
Ask about stock
SKU: PL3600229
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and SkyWatcher/Orion Newton 200 f4 and f5 Telescopes
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this...
Ask about stock
SKU: PL3600237
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and SkyWatcher/Orion Newton 250 f4 and f5 Telescopes
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this...
Ask about stock
SKU: PL3600244
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and Takahashi Telescopes with M72 Thread
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these...
Ask about stock
SKU: PL3600212
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and Telescopes with LARGE 3.3" SC Thread
This SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3”...
In stock (2) SKU: PL3600209
Primaluce Lab
Primaluce Lab Adapter between ESATTO 2" and Telescopes with SC Thread
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread...
Ask about stock
SKU: PL3600268
Primaluce Lab
Primaluce Lab Adapter between ESATTO 3" and Borg 90FL or 107FL f3.9" Telescopes
If you are searching for the most precise motorized focuser for Borg 90FL and 107FL f3.9, this adapter allows you to connect ESATTO 3" to these telescopes. Remove the original focuser of the Borg 90FL and 107FL f3.9 and...
In stock (3) SKU: PL3600236
Primaluce Lab
Primaluce Lab Adapter between ESATTO 3" and GSO/Orion/TPO Ritchey-Chretien 10", 12", 14" and 16" Telescopes
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and cabron tubes) for astrophotography, this adapter allows you to connect ESATTO...
Low stock (1) SKU: PL3600271
Primaluce Lab
Primaluce Lab Adapter between ESATTO 3" and Takahashi FSQ85 Telescope
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your...
In stock (2) SKU: PL3600245
Primaluce Lab
Primaluce Lab Adapter between ESATTO 3" and Takahashi Telescopes with M72 Thread
Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back of these...
Ask about stock
SKU: PL3600216
Primaluce Lab
Primaluce Lab Adapter from M56 to M48 with Stop Ring for ESATTO 2"
The M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for...
In stock (2) SKU: PL3600242
Primaluce Lab
Primaluce Lab Adapter from M56 to M54 with Stop Ring for ESATTO 2"
Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54...
In stock (2) SKU: PL3600225
Primaluce Lab
Primaluce Lab Adapter from M56 to SC with Stop Ring for ESATTO 2"
The SC thread adapter for ESATTO 2" allows you to connect any accessory with SC female thread, like the SC focal reducers to ESATTO. Just thread this adapter to the M56 thread in the ESATTO 2" focuser draw tube....
In stock (2) SKU: PL3600218
Primaluce Lab
Primaluce Lab Adapter from M56 to T2 with Stop Ring for ESATTO 2"
Adapter from M56 to T2 with stop ring for ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the...
In stock (2) SKU: PL3600277
Primaluce Lab
Primaluce Lab Adapter from M81 to M48 with Stop Ring for ESATTO 3"
This adapter from M81 to M48 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M48...
Ask about stock
SKU: PL3600275
Primaluce Lab
Primaluce Lab Adapter from M81 to M54 with Stop Ring for ESATTO 3"
This adapter from M81 to M54 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54...
In stock (2) SKU: PL3600279
Primaluce Lab
Primaluce Lab Adapter from M81 to M57 with Stop Ring for ESATTO 3"
This adapter from M81 to M57 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M57 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M57...
In stock (2) SKU: PL3600262
Primaluce Lab
Primaluce Lab Adapter from M81 to M68 with Stop Ring for ESATTO 3"
This adapter from M81 to M68 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M68...
Ask about stock
SKU: PL3600252
Primaluce Lab
Primaluce Lab Adapter from M81 to M72 Female for ESATTO 3"
This Primaluce Lab Adapter from M81 to M72 female for ESATTO 3" allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.
In stock (2) SKU: PL3600272
Primaluce Lab
Primaluce Lab Adapter from M81 to M72 with Stop Ring for ESATTO 3"
This adapter from M81 to M72 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M72 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M72...
In stock (2) SKU: PL3600282
Primaluce Lab
Primaluce Lab Adapter from M81 to T2 with Stop Ring for ESATTO 3"
This adapter from M81 to T2 with stop ring for ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks...
In stock (5) SKU: PLLEST2-B
Primaluce Lab
Primaluce Lab ESATTO 2" Robotic Microfocuser
ESATTO is the new generation robotic focuser for telescopes designed by PrimaLuceLab to fulfill the needs of the most demanding astrophotographer! Now you can remove the stock focuser from your telescope and, thanks to a...
In stock (5) SKU: PLLEST3-B
Primaluce Lab
Primaluce Lab ESATTO 3" Robotic Microfocuser
ESATTO is the new generation robotic focuser for telescopes designed by PrimaLuceLab to fulfill the needs of the most demanding astrophotographer! Now you can remove the stock focuser from your telescope and, thanks to a...
In stock (3) SKU: SESTOSENSO2
Primaluce Lab
Primaluce Lab SESTO SENSO 2 Sixth Sense Robotic Focusing Stepper Motor
Compatible with most focusers, install it in place of the micrometer knob and connect it to the USB port of your EAGLE or Windows computer to remotely control without vibration and with high precision your telescope's...
In stock (4) SKU: SESTOSENSO-TEMP
Primaluce Lab
Primaluce Lab TEMPERATURE SENSOR for Sesto Senso, ECCO and ESATTO
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO, the robotic focusing motor for telescopes.
Ask about stock
SKU: Rigel-STEP-USB
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control and Installation Kit for Baader Steeltrack Newtonian Focuser
RIGEL Systems Stepper Motor, USB nStep Focus Controller, free temperature sensor and Installation Kit for the Newtonian version of the Baader Steeltrack focuser (model 2957030)
Ask about stock
SKU: Rigel-STEP-USB-SW
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control and Installation Kit for Various Skywatcher Focusers
RIGEL Systems Stepper Motor, USB nStep Focus Controller, free temperature sensor and Installation Kit for various Skywatcher focusers
In stock (3) SKU: Rigel-TEMP
Rigel Systems
RIGEL Temperature Sensor for Rigel Systems Stepper Motor and DC Motor Kits
This item usually comes free with Rigel Systems complete focus motor kits, but if you ordered them sepaprately or from somewhere else, you might need to order just this temperature sensor on its own.
Ask about stock
SKU: Rigel-STEP-USB-BUTTN
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control with BUTTONS and Installation Kit for Baader Steeltrack Newtonian Focuser
RIGEL Systems Stepper Motor, USB nStep Focus Controller with BUTTONS and free temperature sensor and Installation Kit for the Newtonian version of the Baader Steeltrack focuser (model 2957030)
Ask about stock
SKU: Rigel-STEP-USB-BUTTN-C11
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control with BUTTONS and Installation Kit for Celestron CPC 925 and CPC 1100
RIGEL Systems Stepper Motor, USB nStep Focus Controller with BUTTONS and free temperature sensor and Installation Kit for a Celestron C9.25, C11, CPC925 or CPC1100 telescopes
In stock (2) SKU: Rigel-STEP-USB-BUTTN-WIFI
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control with BUTTONS, WIFI and Installation Kit for Baader Steeltrack Newtonian Focuser
RIGEL Systems Stepper Motor, USB nStep Focus Controller with BUTTONS and WIFI, free temperature sensor and Installation Kit for the Newtonian version of the Baader Steeltrack focuser (model 2957030)
Ask about stock
SKU: Rigel-Stepper-USB-BT-SW
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control with BLUETOOTH and Installation Kit for Various Skywatcher Focusers
RIGEL Systems Stepper Motor, USB nStep Focus Controller with BLUETOOTH, (without buttons), with free temperature sensor and Installation Kit for for various Skywatcher focusers
In stock (2) SKU: Rigel-USB-nSTEP-WIFI-STEELTRACK
Rigel Systems
RIGEL Stepper Motor, USB nStep Focus Control with WIFI and Installation Kit for Baader Steeltrack Newtonian Focuser
RIGEL Systems Stepper Motor, USB nStep Focus Controller with WIFI, (without buttons), with free temperature sensor and Installation Kit for the Newtonian version of the Baader Steeltrack focuser (model 2957030)
In stock (5) SKU: HitecAstro-DCFocusV2
HitecAstro
Hitec DCFocus v2 Basic DC Controller for Skywatcher, JMI and Other DC Motors
DC Focus controller to control your DC motor driven telescope focuser from your laptop or PC.Now works with Meade #1209 zero shift focuser, too.DownloadsPlease download the instruction manual from here:HitecDCFocus User...
In stock (3) SKU: Hitec-FocusMaster-V2-Stepper
HitecAstro
Hitec Astro Focus Master V2 Stepper Motor Based Focus Controller with Stepper Motor and Bracket
FocusMaster is a high quality digital focus controller with temperature compensation for stepper motor based focusers. This new version now comes with a stepper motor and installation bracket as well. Included coupler has 4mm...
In stock (3) SKU: FocusMaster-V2-Stepper-Handset
HitecAstro
Hitec Astro Focus Master V2 Stepper Motor Based Focus Controller with Stepper Motor, Bracket & Hand Controller
FocusMaster is a high quality digital focus controller with temperature compensation for stepper motor based focusers. This new version now comes with a stepper motor and installation bracket as well. Included coupler has 4mm...
In stock (2) SKU: HitecAstro-FocusMaster
HitecAstro
Hitec FocusMaster Stepper Motor Based Focus Controller
FocusMaster is a high quality digital focus controller with temperature compensation for stepper motor based focusers. FocusMaster includes inbuilt temperature compensation. An external temperature sensing probe is...
In stock (2) SKU: HitecAstro-FocusMaster-Deluxe
HitecAstro
Hitec FocusMaster Deluxe Stepper Motor Based Focus Controller
FocusMaster Deluxe is a high quality digital focus controller with temperature compensation and LCD screen for stepper motor based focusers. FocusMaster includes inbuilt temperature compensation. An external temperature...
Ask about stock
SKU: FTF3515-FSQ106
Starlight Instruments
Starlight Instruments Feather Touch 3.5" Diameter Dual Speed Rack and Pinion Focuser KIT for Takahashi FSQ106ED
Starlight Instruments Feather Touch 3.5" Diameter Dual speed focuser which has a custom machined draw tube with M98X1 female threads. This focuser was designed with the FSQ106ED in mind as it has short in-focus...
In stock (2) SKU: FTM-C11
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron C11
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron C11 Tubes (NOT COMPATIBLE with CPC or Nexstar SE telescopes) If your telescope is less than a few years old, check the style of the back cell to...
Ask about stock
SKU: FTM-C8
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron C8
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron C-8 Tubes (NOT COMPATIBLE with CPC or Nexstar SE telescopes) If your telescope is less than a few years old, check the style of the back cell to...
Low stock (1) SKU: HSM20
Starlight Instruments
Starlight Instruments HSM20 Handy Stepper Motor with Manual Focus Override
This "Handy" stepper motor unit works exclusively with the Starlight Instruments Focuser Boss II motor focus controller. The design of this motor housing allows you to still be able to manually turn the focus...
Ask about stock
SKU: FTM-CPC8
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron CPC 800 / Edge HD 800 / Nexstar 6/8
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron CPC-800, NexStar 6SE, NexStar 8SE and C8 Edge HD Schmidt-Cassegrain Telescopes If your telescope is less than a few years old, check the style of...
Ask about stock
SKU: FTM-CPC925
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron CPC 925 / Edge HD 925 Schmidth-Cassegrain Telescope
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron C9.25, CPC-925 and C9.25 Edge HD Schmidt-Cassegrain Telescopes. If your telescope is less than a few years old, check the style of the back cell...
Ask about stock
SKU: FTM-CPC11
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron CPC 1100 / Edge HD 1100
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron CPC-800, NexStar 6SE, NexStar 8SE and C8 Edge HD Schmidt-Cassegrain Telescopes If your telescope is less than a few years old, check the style of...
Ask about stock
SKU: FTM-C14HD
Starlight Instruments
Starlight Instruments Feather Touch Micro Focuser for Celestron C14 and C14 Edge HD SCT
Starlight Instruments Feather Touch 10:1 Micro Focuser Upgrade for Celestron C14 and C14 Edge HD Schmidt-Cassegrain Telescopes. If your telescope is less than a few years old, check the style of the back cell to...
In stock (3) SKU: 20929
SKYWATCHER
SkyWatcher Electric Dual-Speed Auto-Focuser
SkyWatcher Electric Auto-Focuser Hands-free D.C. focusing device for accurate focusing with the minimum of vibration. Dual speed push-button operation (fast & slow). Powered by one 9V battery (not...
Low stock (1) SKU: TSFOCN2
Teleskop Service
TS-Optics 2-inch Crayford Focuser for Newtonian Telescopes with Base and 1.25" Reducer
This focuser offers best value for your money. It runs very smooth even under high load up to 2.5 kg.Compared with simple rack & pinion focusers, the "Foc N2" is a really improvement...
In stock (2) SKU: 20742
SKYWATCHER
SkyWatcher 1.25-inch - 2-inch Rack and Pinion Focuser
1.25'/2' Rack and Pinion Focuser from Sky-Watcher A high quality focuser designed for Newtonian Reflector Telescopes. Will accept both 1.25" and 2" standard format eyepieces. Features adjustable...
In stock (2) SKU: Lacerta-BTnLL
Lacerta
Lacerta Extra Low Profile Rack and Pinion Precision Dual-Speed Focuser 1.25" - 2" Compatible
Guided on 8 bearings and a precision rack and pinion rail, it provides a 57mm minimum height that is one of the lowest profiles on the market. It is very good value as it is very similar in performance to those much more...
In stock (2) SKU: Lacerta-CRnLP
Lacerta
Lacerta LinearPower Precision Dual-Speed Focuser 1.25" - 2" Compatible
Lacerta CRnLP Precision Dual-Speed Focuser 1.25" - 2" Compatible. Guided on 4 bearings and a rail, it makes this focuser one of the best value focusers as it is very similar in performance to those much more...
In stock (2) SKU: 20176-WHITE
SKYWATCHER
SkyWatcher 1.25-inch - 2-inch Crayford Focuser for Newtonians - WHITE
1.25-inch / 2-inch Newtonian Crayford Focuser from Sky-Watcher - WHITE VERSION A high quality Crayford focuser designed as a direct replacement/upgrade for the rack & pinion focuser supplied with the Sky-Watcher 200mm...
In stock (2) SKU: 20241
SKYWATCHER
SkyWatcher Dual-Speed 2-inch Crayford Focuser Explorer 150-300P
DUAL-SPEED 2" CRAYFORD FOCUSER FOR EXPLORER 150 / 200 / 250 / 300P NEWTONIAN REFLECTOR TELESCOPES Designed to retro-fit to the Explorer-150/200/250/300P Newtonian Reflectors originally supplied with a 2" (two-inch)...
In stock (2) SKU: 20242
SKYWATCHER
SkyWatcher Dual-Speed 2-inch Crayford Focuser for Explorer-190MN
DUAL-SPEED 2" CRAYFORD FOCUSER FOR EXPLORER-190MN MAKSUTOV NEWTONIAN Designed to retro-fit to Explorer-190MN Maksutov Newtonian telescopes originally supplied with a single-speed 2" Crayford Focuser. Gear Ratio...
In stock (2) SKU: 20969
SKYWATCHER
SkyWatcher Dual-Speed 2-inch Crayford Focuser for Newtonians
DUAL-SPEED 2" CRAYFORD FOCUSER FROM SKYWATCHER FOR NEWTONIAN REFLECTOR TELESCOPES Designed for Newtonian Reflector telescopes of 9" to 15" aperture, and accepts either 1.25" or 2"...
In stock (2) SKU: 20172
Optical Vision
Dual-Speed 2-inch Crayford Focuser for SCT Telescopes
DUAL-SPEED 2" CRAYFORD FOCUSER FOR SCT (SCHMIDT-CASSEGRAIN) TELESCOPES A high quality CNC Machined 10:1 dual-speed Crayford focuser designed as an upgrade to Schmidt Cassegrain Telescopes.Will accept both...
In stock (2) SKU: 20171
Optical Vision
Dual-Speed 2-inch Crayford Focuser for Skywatcher Refractor Telescopes
DUAL-SPEED 2" CRAYFORD FOCUSER FOR SKYWATCHER REFRACTOR TELESCOPES A high quality CNC Machined 10:1 dual-speed Crayford focuser designed as a direct replacement/upgrade for the rack & pinion focuser supplied with the...
Low stock (1) SKU: 20170
Optical Vision
Dual-Speed 2-inch Low Profile Crayford Focuser for Skywatcher Newtonian Telescopes
DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR SKYWATCHER NEWTONIAN REFLECTOR TELESCOPES A Low Profile CNC machined 10:1 dual-speed focuser designed for Newtonian Reflector telescopes of 9" to 15"...
- per page
