Home :: OPTICAL ACCESSORIES :: Finder-, guider- and polarscopes :: Guiders :: Celestron Off Axis Guider

Celestron Off Axis Guider

Manufacturers View products from this brand

in In stock (2)
0.75 kg
Our price:

including VAT 20.00 % ( £41.50 )

The Off-Axis Guider is an essential astroimaging accessory for long focal length telescopes that require the most accurate guiding possible. The Celestron Off-Axis Guider uses a prism to intercept a small portion of the telescope’s focal plane (outside the field of view of the main imaging camera) to locate a guide star. Any movement seen by the guide star will be the exact same movement seen by the imaging camera. Guiding this way will correct for tracking errors, as well as opto-mechanical errors or flexure. The result: better astroimages with pinpoint round stars.

Off-Axis Guiders have been around for a long time, but typically pose three main challenges:

  • Getting both imaging camera and autoguider to reach focus with one another is time consuming and sometimes requires experimentation.
  • Finding a guide star from the far edges of the telescope’s focal plane can be difficult, considering the small field of view and sometimes less-than-ideal illumination.
  • Additional spacers and adapters are usually required for your particular camera, telescope, and autoguider, which adds to cost and complexity.

Celestron's Off-Axis Guider addresses these challenges by:

  • Featuring a high-quality, fixed-orientation Helical focuser. This provides extremely smooth and accurate focus of the autoguider without changing (or twisting) the autoguider camera orientation.
  • Providing a large 12.5mm prism that can be adjusted to move closer to the center of the telescope’s focal plane, depending on the size of the imaging camera. This results in brighter guide stars, with the help of the large prism to fully illuminate the autoguider sensor.
  • Including all the needed spacers and adapters are included for most common imaging configurations, including Nightscape CCD cameras, DSLR cameras, and more. The following adapters are included: SCT/EdgeHD, female M42 (T-thread), female M48, male M42 (T-thread), male M48, 3 x  T-thread spacers

USERS OF 8" Edge HD: 

Please note, this OAG will work with the 8" Edge HD telescope at f/10, but it will not be usable with the 0.7x reducer according to customer feedback.

Additonal Specifications

  • Telescope Connection: M42 T-thread, M48, and SCT/EdgeHD
  • Camera Connection: M42 T-thread, and M48
  • Autoguider Connection: M42 T-thread, and standard 1.25" adapter
  • Helical Focuser Travel: 8mm

Click on the above image to see the full size image.

You may download the Instruction Manual here: Celestron OAG Instruction Manual

Please Note: The optimum photographic back focus of the EdgeHD 8” when used with #94242 Reducer Lens at f/7 is 105 mm (please note, the back focus distance for Edge 8"  without the reducer is 133mm)
Our #93648 Off-Axis Guider, when used with the reducer #94242 and a DSLR, reaches appx 120mm (other imaging equipment may vary, please carefully work out your distances prior to purchase)
Therefore because the 105mm distance is so critical, the Off-Axis Guider is not typically compatible for use with a DSLR, EdgeHD 8" and Reducer lens
The EdgeHD 11" and 14" all keep the same 146mm back focus with or without the reducer so are not affected.

: *
: *
: *
Primaluce Lab PLUS 30mm Spacers
Primaluce Lab Guide Rings PLUS 80mm
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.