365Astronomy Camera Tilting Unit - CTU M48x0.75 - Focal Plane Adjusting Ring
With the ever increasing size of camera sensors there is a need to precisely adjusting them so that the sensor's plane will be perpendicular to the optical axis of the system.
This cannot always be achieved by simply attaching the camera to the telescope via existing standard accessories that results in uneven sharpness of the image.
This Camera Tilting Unit / Focal Plane Adjusting Ring addresses the above issue.
M48x0.75 female thread on both sides
Max travel: 3mm
Min thickness is 27.0mm
Diameter (outer): 78mm
Focal Plane Angle correction: 0 - 10 degrees
Below is an example of application. Image is for demonstration purposes only. Other adapters are available separately.
|Weight in Kg||0.2|