Baader Multipurpose Finder Bracket MQR III, fitting all 50mm Finder Scopes (max. Diam.62mm), w. dovetail, fitting Vixen/Synta/Celestron, including Baader Standard Base (2457000A). Please CONTACT US for availability...
Baader Multipurpose Finder Bracket MQR IV, fitting all 60mm Finder Scopes (max.Diam. 72mm), w. dovetail, fitting Vixen/Synta/Celestron, including Baader Standard Base (2457000A). Distance between rings (center to center):...
8x50 Finderscope with illuminated Polaris-finder recticle and illuminator, pearl-white structurized paint, matching Astro Physics and TEC tube color Please CONTACT US for availability information!Baa-12-2407115B...
Guidescope rings BP I (2 pcs) for tube diametres between 60 to 120 mm, with 6 large handknobes with screw and ball bearing tips Baader Planetarium – Guidescope rings with ball-bearing end surfaces Massive, twisted...
Guidescope rings BP II (2 pcs) for tube diametres between 110 to 160 mm, with 6 large handknobes with screw and ball bearing tipsBaader Planetarium – Guidescope rings with ball-bearing end surfacesMassive, twisted...
Guidescope rings BP III (2 pcs) for tube diametres between 140 to 185 mm, with 6 large handknobes with screw and ball bearing tipsBaader Planetarium – Guidescope rings with ball-bearing end surfacesMassive, twisted...
With both jump covers flipped open, the unit works as a terrestrial as well as an astronomical Red Dot Finder for straight through aiming with both eyes open, featuring a sharp 2 MOA red dot with 11 brightness set points. The...
Battery 3V Lithium for Celestron Star Pointer and Baader Sky Surfer III and VIf you see that stock=0, don't worry, we may get it for you in most cases quickly. Please tell us what you are after, and we'll check with...
Battery set 1.4 V (6 pieces)If you see that stock=0, don't worry, we may get it for you in most cases quickly. Please tell us what you are after, and we'll check with the manufacturer. Click here to CONTACT US ! ...
Finding objects couldn’t be easier! A 1x, or unit power finderscope designed so you can point the telescope while scanning the sky with both eyes. A mirror lens projects the image of a LED illuminated pinpoint into the...
This useful accessory speeds accurate polar alignment by providing a means of visually aligning your German equatorial mount with Polaris and true North. As a result, you can spend more time observing and less time setting...
Celestron Polar Finder Scope for the Advanced Mount CG-5This useful accessory speeds accurate polar alignment by providing a means of visually aligning your German equatorial mount with Polaris and true North. As a result,...
1pc Handknobe (for Guide scope rings & Counterweights) M10/Diam.45mmIf you see that stock=0, don't worry, we may get it for you in most cases quickly. CONTACT US ! Please tell us what you are after, and we'll check...
Spend less time centering your target and more time stargazing with Celestron’s new premium finderscope: StarPointer Pro. Traditional red dot finderscopes were originally created for shooting sports such as...
The HM5 Polar axis finder scope is a very useful accessory for EQ5 Sky-Watcher equatorial mounts. It speeds up and refines the polar alignment procedure so the observer can spend more valuable time observing, rather than...
A quick message for those who might have thought to miss this promotion is that due to the fact that 1 Jan was a bank holiday followed by a weekend, we decided to end it on the morning on the first working day of the year: 9am on Monday, 4 January 2021.
So from now you will still have about 36-37 hours to make a decision... The following camera are in this promotion:
ASI071MC-PRO (APS-C sized),
ASI6200MC-PRO (full frame) ASI6200MM-PRO (full frame) and various bundles with this monochrome camera,
ASi2400MC-PRO (full frame, large pixels),
ASI1600GT (with built-in filter wheel),
ASI183GT (with built-in filter wheel),
ASI2600MC-PRO (APS-C sized) (one of the most popular cameras these days),
ASI533MC-PRO (smaller square filter, but extremely popular) ASI1600MMP-KIT3 (this is the only camera that will stay on promotion till stocks last),
ASI462MC-PRO (currently the best and most popular planetary camera due to its extreme sensitivity in near IR),
ASI120MC-S and ASI120MM-S (no introduction needed - our longest selling planetary imagers and guide cameras),
and finally but not lastly at all: ASIAIR PRO (and BUNDLES) - the must have all rounder astro photographer's brain and power center for your ZWO camera: for aligning, locating, guiding and imaging, etc. - all in one...
Hope you can find something on the above list that might be worth considering!
Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
Background
The TS 8-inch RC has M90x1mm connections at the focuser end of the scope. My setup has a TS
50mm extension adapter with for 6- & 8-inch RC connected to the scope (TS part no: GSRCV50),
to accommodate the long back-focus.
Attached to this is a TS M90 tilting adapter flange (TS part no: GSRCJ90). This is an aid to
collimation and allows the long axis of the focuser to be aligned with the optical axis of the scope.
I then have a standard TS monorail focuser for the RC, again with an M90x1 connection.
Image 1 shows the 50mm extension and tilting flange, with the old focuser removed. Note the M90
male thread at the end of the flange, to which the focuser connects.
Fitting the Baader Diamond Steeltrack RT
It is assumed that the reader has access to the Steeltrack manual and has purchased the necessary
RT-Adapter M90x1 Diamond Steeltrack (Baader part nu...
PLEASE READ IT! IMPORTANT! COVID-19 and STOCK AVAILABITITY INFO:
Please note that currently we receive about 10 times more phone calls, 3-4 times as many emails, orders etc. whilst we work with reduced staff, so please be patient.
BRESSER, EXPLORE SCIENTIFIC, LUNT and VIXEN products: whilst we do stock some of these products, in many cases we would rely on the distributor's stock. Their warehouse is in Germanyand currently the delivery times are about 7-10 days from there, although this is not exactly a promise. Brexit caused lots of problems and huge delays generally. We expect that it will take several months till the situation will improve. SKYWATCHER, Helios, Zenith and OVL Products: we will not accept any orders on backorder for these products until further notice due to price change. We were advised that the weak USD caused increase of product prices in China, plus shipping costs increased by 600%, so we expect a new pricelist with increased prices shortly.
PLEASE CONTACT US TO CHECK CURRENT AVAILABILITY BEFORE YOU ORDER ANY SKYWATCHER, CELESTRON, OVL, BAADER, BRESSER, LUNT, TS and ZWO PRODUCTS (and possibly some others as well), AS STOCK LEVELS FLUCTUATE AND WE JUST CANNOT UPDATE THE LEVELS IN REAL TIME...
If you have an urgent inquiry, please call Zoltan on his mobile during working hours (Mon-Fri 9am-5pm)
Please send a text or WhatsApp message to Zoltan ONLY if you failed to call him or if it is extremely urgent. His mobile has been flooded with messages as well...
079 1278 4737 (international format: + 44 79 1278 4737)
Thanks for your patience!
Keep safe and healthy!
sidenote... TO THE ATTENTION OF OUR INTERNATIONAL CUSTOMERS!
EU CUSTOMERS: We have temporarily disabled European destinations whilst we adjust our system to the new VAT rules. Hopefully we'll be able to resume shipments to EU countries soon.
USA CUSTOMERS: shipping to the USA is active again, but we request customers to confirm product availability before placing an order! If you are ordering an MGEN-3, no need to check stock, we've got plenty of those. Please note, we will try to avoid sending goods via a postal service due to the huge delays and as DHL Express is more expensive than our system would currently charge for, we might have to charge extra depending on the value and size of the ordered goods.
Please note, due to the increased number if issues with postal services to most directions (especially Australia, Canada etc), we will only ship to these countries on the base of special request and depending on the value and size of the products. This is a temporary measure and we hope to supply worldwide again as soon as the situation improves.
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.