365Astronomy 12V 1.0A AC Adaptor for Small Telescope Mounts
12 Volt 2.0A POWER SUPPLY ADAPTER - MAINS UNIT FOR SMALL TO MEDIUM GOTO TELESCOPES
Mains Power Supply recommended for Skywatcher, Meade and iOptron small to lower mid-range telescope mounts.
- Plugs directly into UK mains socket
- Certified to BS 1363-1 standards
- Input: 100V-240V 0.4A
- Output: 12V 1.0Amps
- Provided with 5.5mm x 2.1mm center positive connector
- Length of cable: 150cm
This power supply unit is recommended for smaller and mid-range computerised telescopes like Skywatcher Merlin, Supatrak, SynScan AZ GOTO etc.Safety warning:
RISK OF ELECTRIC SHOCK
DRY LOCATION USE ONLY
Designed for mainly indoor use, so PLEASE USE AN EXTENSION LEAD WITH SAFETY RCD for your own safety if you decide to use it outdoor at your own risk (!).
We would also recommend to put it inside a much larger transparent plastic box (e.g. sandwich box or shoe box with ventilation on sides, so to exclude any possibility of dew or rain water getting in contact with the adapter for your safety and longer service of the equipment. The above are only personal recommendations that worked for us, but otherwise we can take no responsibility for where and how you use it.
Please do not order this PSU for a Celestron telescope as your telescope's warranty might be invalidated.
For Celestron telescopes we would recommend only a 7Ah Lithium Power Tank or the Baader Outdoor Power Supply as these have been tested/approved by Celestron and/or the Celestron UK distributor.
Image is for demonstration purposes only.
1-year Accessories Warranty