365Astronomy 12V 5A PSU AC Mains Power Supply Adaptor for Heavy Duty Telescope Mounts
12 Volt 5A PSU POWER SUPPLY SWITCHING ADAPTER - MAINS UNIT FOR GOTO TELESCOPES
Mains Power Supply recommended for Skywatcher and iOptron heavy duty telescope mounts.
You might realise that all similar devices are designed for indoor use, so YOU MUST USE AN EXTENSION LEAD WITH SAFETY RCD when used outdoor for your own safety. We can take no responsibility for where and how you use it.
- Heavy duty kettle type UK mains plug
- Input: 100V-240V
- Output: 12V 5.0Amps LPS
- RoHS certified
- LED power indicator
- Provided with 5.5mm x 2.1mm center positive connector
- Length of cable: 175cm from AC mains to adapter and 150cm from adapter to DC connector
Please do not order this PSU for a Celestron telescope as your telescope's warranty might be invalidated.
For Celestron telescopes we would recommend only a 7Ah Power Tank or 17Ah Power Tank or the Baader Outdoor Power Supply as these have been tested/approved by Celestron and/or the Celestron UK distributor.
Designed for mainly indoor use, so PLEASE USE AN EXTENSION LEAD WITH SAFETY RCD for your own safety if you decide to use it outdoor at your own risk (!).
We would also recommend to put it inside a much larger transparent plastic box (e.g. sandwich box or shoe box with ventilation on sides, so to exclude any possibility of dew or rain water getting in contact with the adapter for your safety and longer service of the equipment. The above are only personal recommendations that worked for us, but otherwise we can take no responsibility for where and how you use it.
Made in China, but supplied by a European distributor and comes with all relevant European and worldwide certifications (RoHS, CE, FCC, EAC, TUV etc.)
Image is for demonstration purposes only.
1-year Accessories Warranty