Home :: OPTICAL ACCESSORIES :: Finder-, guider- and polarscopes :: Guiders :: LACERTA M-GEN v2 Stand-Alone Guider

LACERTA M-GEN v2 Stand-Alone Guider

Manufacturers View products from this brand

in In stock (6)
Model
Lac-MGEN
Weight
1.10 kg
Our price:
$611.04
Qty

f2a1

The LACERTA M-GEN v2 Stand-Alone Guider is a fully functioning, reliable and high sensitivity  precision autoguider that will guide your telescope without a PC or laptop.

The Lacerta MGEN is so sensitive and precise that it will give you 0.38" guiding precision even with a simple 50mm
(9x50) finderscope  converted into a guidescope.

This precision is good enough for even the biggest (longest focal length) amateur telescopes available on the market today.

FREE SHIPPING TO UK MAINLAND!

This device consists of two parts:

 

1. an AUTOGUIDER CAMERA (CCD chip size: 752x852 pixels, 3.6 x 2.7 mm, Type-E SONY ICX279AL, pixel size approximately 4.7 micron) with a standard T2 thread for attaching to a guider telescope or an off-axis guider and
2. a CONTROLLER with buttons and display (128x64 pixels). The display shows the live image of the camera. The stars appearing on the screen vary in size. The bigger the star appears the better for guiding. After selecting the guide star the following parameters can be adjusted:
- Refresh rate and shutter speed (independently adjustable between 0.1 and 4 sec manually or automatically)
- Correction speed (for both axes independently adjustable to avoid possible resonances)
- Tolerance (default 0.5 pixels, but its interpolated value can be as small as 0.1 pixels, and up to 127 pixels)
- Auto-calibration (it can be chosen that the RA/Dec-Axis to be parallel with the rows of pixels on the AG-chip or to be at a certain angle)
- On release socket (EOS-compatible timer) provides you the number, time and pause time of the exposures, and the waiting period after the camera mirror lockup.
- Measurement mode (turn off the correction) for the detection of the periodic error
- Various statistics (Seeing measurements, inspection of play of the mount, etc.)

There are 4 LEDs (which correspond to the 4 ways) on the control box that will blink if the Autoguider makes a correction of the tracking.
It’s a NEW and long awaited function that the Autoguider can provide a parallel shift command (dithering); the axes in both directions are independently executable, and it’s especially useful function for shooting series.With this function the Autoguider moves the mount a few pixels between each image, so that dark noise will not accumulate in the stacked images, thus saving enormous amount of time and effort when processing images.The camera works very fast, because during the tracking it is only the area of the chip around the image of the guide star that being read and processed.
The M-GEN LACERTA stand-alone Guider is very sensitive. With a 90mm f/10 guider telescope, with 1 sec refresh rate it can guide on a 10-magnitude star safely. In practice, we have succeeded with the same guider telescope with an integration time of 4 sec to a 12-magnitude guider star.

INCLUDED:

  • GEN Autoguider Camera
  • MGEN Control Unit
  • All necessary cables (three cables)

Downloads (Last updated on 20 Sep 2013):

MGEN Quick Start Guide

Instruction Manual for Firmware version 2.10

MGEN APPLICATION Instruction Manual

Firmware Update v 2.20 (Compressed into ZIP. Right click and choose Save As!)

Firmware Update v 2.21 (Compressed into ZIP. Right click and choose Save As!)

  Click on the image to see it in higher resolution: 

    

Lacerta MGEN AutoGuider in use on above picture. FUF-543 Adapter, Skywatcher 9x50 Finderscope, Lacerta Microfocus and 200/1000 Newtonian Reflector are available separately.


Click on the image for full resolution! Image shows the guiding results of a Skywatcher EQ8 mount with MGEN stand alone guider via a 50mm guidescope (9x50 finderscope converted into a guidescope)

User contributions

Below: M51 - The Whirlpool Galaxy by Tommy Nawratil; for full resolution, full details and technical card, click on the image!

Telescope used: Lacerta Photo Newton

Camera used: ZWO ASI1600MM-COOLED

Guiding camera used: Lacerta MGEN

M51 - The Whirlpool Galaxy by Tommy Nawratil

: *
: *
: *
Type the characters you see in the picture:


*
Adapter from 1.25" to T2 with M28.5 Inner Filter Thread
$15.39
LACERTA EOS-1 Exposure Cable for M-GEN Stand Alone Guider
$17.58
365Astronomy 50mm Mini Guidescope / Finderscope Kit
$101.55
Parfocal Adapter between MGEN Autoguider and 9x50 Finderscope
$32.86
Spare Large Base for Celestron StarSense Accessory
$18.03
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
 
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.